Seagate ST2500418AS Instrukcja Użytkownika Pobierz pdf (Strona 41)

DVR User’s Manual

• If there is no exportable device connected to the DVR, then a warning

message will be shown on the screen, as below figure:

No exportable device detected.

Please install the target device/media to the DVR.

Enter: Retry ESC: Exit

Retry Esc

4.4.2.3 Export Event Video

To export event video, follow these steps:

• Press SEARCH and playback wanted event video. To playback event

video, refer to OSD Setup Manual Section Search Recorded Video

• After entering Playback mode, press COPY. The “ezBurn” window will

display as below figure. The information shown on it is read only.

ezBurn confirmation

Selected Device: Built-in DVD+RW

All data on the disc will be erased.

Exported Required Size = 11 MB

Export Event Info:

Data Time Ch Type

2010/12/07 AM 10:42:35 13 Motion

Enter: Yes ESC: No

• Press ENTER to start the export the whole event video to the connected

device; or, press ESC to abort.

• If there is no exportable device connected to the DVR, then a warning

message will be shown on the screen.

4.5 Dome Control

The DVR allows users to control a dome camera via the function keys on the

front panel. In Live mode, users can press any CHANNEL key to display the

desired dome camera in full-screen. To enter Dome Control mode, press the

DOME key and a dome control panel will be displayed. To exit the Dome

Control mode and return to Live mode, press ESC or DOME.

4.5.1 Dome Connection

Follow the steps to install dome camera.

• See Setup Guide for RS-485 port pin definition.

• Connect the R+, R- terminals on the dome camera to the D+, D− terminals

on the RS-485 port by RS-485 cable respectively. Refer to the connection

figure illustrated in Setup Guide.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 67 68

Brak uwag

Seagate ST2500418AS Instrukcja Użytkownika Strona 41