Seagate Medalist Pro 6451 Przewodnik Instalacji Pobierz pdf

EDALIST

ARD

RIVE

NSTALLATION

UIDE

Medalist

Pro 6450 (ST36450A)

Medalist Pro 6451 (ST36451A)

for ATA (IDE)-Compatible PCs

SING

ISC

IZARD

DiscWizard is a revolutionary new Windows program that

makes it easy to install your new Seagate drive. DiscWizard

helps you configure your new drive and your computer. It ana-

lyzes your system, lets you select various installation options

and creates customized step-by-step instructions. It also al-

lows older computers to access the full capacity of your drive.

You can run DiscWizard to install your new hard drive if:

• You already have an existing, bootable hard drive in your

computer with at least 3 Mbytes of available disc space

and

• You are running Windows 3.

or Windows 95.

If you can run DiscWizard, you do not have to read this instal-

lation guide. Instead,

before you install your new drive

, follow

the instructions on the DiscWizard diskette to install your

drive. DiscWizard provides all the information you need to

install your new drive.

If you cannot run DiscWizard, follow the instructions in

this installation guide to install and configure your new

drive. For additional information and troubleshooting

tips, see the back of this sheet. This symbol:

indi-

cates that additional information on a topic appears on

the back of this sheet.

TTACHING

ABLES

AND

OUNTING

THE

RIVE

1 If you are installing a new ATA interface cable, attach one

end of the cable to the interface connector on your com-

puter or host adapter. The ATA cable must be no more than

18 inches long.

2 Thread the interface cable through the drive bay and attach

the connector at the end of the interface cable to your new

drive. If you have two drives, attach the second drive to

the second connector.

Caution. Make sure to align pin 1 on the com-

puter or host adapter interface connector with

pin 1 on your drive or drives. Pin 1 on the

interface cable is usually indicated by a stripe

along the edge of the cable.

1. O

RIVE

If your new Seagate

Medalist

Pro

drive will be the only drive in

your computer, you do not have to change any jumper settings.

In this case, skip ahead to “Attaching Cables and Mounting the

Drive.”

If you already have one hard drive in your computer and you

are installing a second drive, you must configure one drive as a

master and the other as a slave. The master drive will be the

“boot” drive (drive C), from which the computer loads system

software when it first starts up. To configure your new Seagate

drive as the master, slide a jumper onto pins 7 and 8 (see be-

low). To configure the drive as a slave, slide a jumper onto pins

5 and 6 only. The jumper on pins 6 and 8 is a spare and does

not affect drive operation. If you need to change the jumpers on

your existing hard drive, see the Disk Manager online manual,

or contact the drive manufacturer.

135

Drive is slave

Master/slave

jumper block

pin 1

4-pin power

connector

40-pin ATA

interface

connector

Spare jumper

Drive is Master with an ATA-

compatible slave

One drive only

Pin 1

1 2 3 4 5 6 7 8 9 10

Podsumowanie treści

Strona 1 - Medalist Pro 6451 (ST36451A)

MEDALIST PRO HARD DRIVEINSTALLATION GUIDEMedalist Pro 6450 (ST36450A)Medalist Pro 6451 (ST36451A)for ATA (IDE)-Compatible PCsUSING DISCWIZARDDiscWizar

Strona 2 - Interface

Cable Select JumperSome computers differentiate between master and slave drives usingspecially designed interface cables that have the line to pin 28

Strona 3 - Disk Installation

HANDLE WITH CARE!Disc drives are extremely fragile. Do not drop or jaryour drive.WHAT YOU WILL NEED• Straight-edge and Phillips screwdrivers• Drive mo

Strona 4

2 a33A. INSTALLATION USING DISK MANAGER1 Boot your computer from a bootable DOS diskette (use MSDOS Version 5.0 or later). Booting from a diskette en

Strona 5 - (V)iew/Print Online Manual

b33B. STANDARD DOS INSTALLATIONCaution. Partitioning or formatting a driveerases all data on it. Seagate assumes noliability if you erase your data.

Strona 6 - Online Services

Cable Select JumperSome computers differentiate between master and slave drives usingspecially designed interface cables that have the line to pin 28

Strona 7 - Supported Operating Systems

video card and host adapter. If the computer recognizes the drivewhen you reboot the computer, turn off the computer. Reinstall theother peripheral ca

Strona 8 - Direct-Support Services

Supported Operating SystemsThe Disk Manager dynamic drive overlay provides support for drivesthat have capacities greater than 528 Mbytes under MS-DOS

Strona 9

py p pby the BIOS.!Caution. If you change the drive-type values in thesystem setup program, you must partition andformat the drive again. This erases

Strona 10 - (M)igrate Dynamic Drive

2 b3 a3MEDALIST PRO HARD DRIVEINSTALLATION GUIDEMedalist Pro 6450 (ST36450A)Medalist Pro 6451 (ST36451A)for ATA (IDE)-Compatible PCsHANDLE WITH CARE!

Komentarze do niniejszej Instrukcji

Brak uwag

Seagate Medalist Pro 6451 Przewodnik Instalacji

Przeglądaj online lub pobierz Przewodnik Instalacji dla Płyty główne do serwerów / stacji roboczych Seagate Medalist Pro 6451. Seagate Medalist Pro 6451 Installation guide [en] Instrukcja obsługi

Podsumowanie treści

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Płyty główne do serwerów / stacji roboczych Seagate Medalist Pro 6451