Seagate ST3400071FC Podręcznik Użytkownika

3PAR InForm® OS 2.2.4Command Line Interface Reference3PAR, Inc.4209 Technology DriveFremont, CA 94538 USAPart No. 320-200114 Rev AMarch 2009

xTable of Contents Command Line Interface Reference InForm OS Version 2.2.43.2.1 Drive Cage Management 3.23.2.2 Physical Disk Management 3.33.3 Doma

8.4Command Line Interface Reference InForm OS Version 2.2.4EXAMPLESThe following example displays the CLI client version:The following example identif

InForm OS Version 2.2.4 Command Line Interface Reference9.1Compact Commands9Compact CommandsIn this chapter compactcpg 9.2 compactld 9.4

9.2Command Line Interface Reference InForm OS Version 2.2.4COMMANDcompactcpgDESCRIPTIONThe compactcpg command consolidates logical disk space in Commo

9.3InForm OS Version 2.2.4 Command Line Interface Reference-fDoes not ask for confirmation before compacting the logical disks. Unless the -f option i

9.4Command Line Interface Reference InForm OS Version 2.2.4COMMANDcompactldDESCRIPTIONThe compactld command consolidates space on the logical disks.SY

9.5InForm OS Version 2.2.4 Command Line Interface Reference-fDoes not ask for confirmation before compacting the logical disks. Unless the -f option i

9.6Command Line Interface Reference InForm OS Version 2.2.4

InForm OS Version 2.2.4 Command Line Interface Reference10.1Control Commands10Control CommandsIn this chapter controliscsiport 10.2 controlmag 10

10.2Command Line Interface Reference InForm OS Version 2.2.4COMMANDcontroliscsiportDESCRIPTIONThe controliscsiport command is used to set properties o

10.3InForm OS Version 2.2.4 Command Line Interface ReferencedhcpSets whether or not (on or off) the iSCSI target should use the DHCP to obtain its IP

xiTable of Contents InForm OS Version 2.2.4 Command Line Interface Reference3.11 Preserved Data Commands 3.163.12 Replication Commands 3.173.12.1 Ph

10.4Command Line Interface Reference InForm OS Version 2.2.4<node:slot:port>The physical location of the iSCSI target port.OPTION-fDo not ask fo

10.5InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDcontrolmagDESCRIPTIONThe controlmag command takes drive magazines, or disk drives w

10.6Command Line Interface Reference InForm OS Version 2.2.4SPECIFIERS<cage_name>Specifies the name of the drive cage. Drive cage information ca

10.7InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDcontrolpdDESCRIPTIONThe controlpd command spins a physical disk up or down. This co

10.8Command Line Interface Reference InForm OS Version 2.2.4SPECIFIERS<WWN>...Specifies the World-Wide Name (WWN) of the physical disk. This spe

10.9InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDcontrolportDESCRIPTIONThe controlport command controls all aspects of a Fibre Chann

10.10Command Line Interface Reference InForm OS Version 2.2.4 controlport rcfc init [–f] <node:slot:port> controlport rcfc delete [–f] <nod

10.11InForm OS Version 2.2.4 Command Line Interface ReferenceChange Notification (RSCN) message is issued to the fabric controller whenever a VLUN is

10.12Command Line Interface Reference InForm OS Version 2.2.4rcip pingPerforms a ping from the specified interface to the specified address. Only for

10.13InForm OS Version 2.2.4 Command Line Interface Reference–c <cage_name>If using a private loop topology, a Loop Initialization Primitive (LI

xiiTable of Contents Command Line Interface Reference InForm OS Version 2.2.46 Cancel Commandcanceltask 6.27 Check Commandscheckld 7.2checkpassword

10.14Command Line Interface Reference InForm OS Version 2.2.4–s <size>Specifies the packet size. If no size is specified, the option defaults to

10.15InForm OS Version 2.2.4 Command Line Interface ReferencenodeSpecifies the node using a number from 0 through 7.slotSpecifies the PCI bus slot in

10.16Command Line Interface Reference InForm OS Version 2.2.4<IP_address>Specifies the IP address for a Remote Copy interface.<gateway_addres

10.17InForm OS Version 2.2.4 Command Line Interface Reference<speed> half|fullUse only with the rcip speed subcommand. Specifies the speed setti

10.18Command Line Interface Reference InForm OS Version 2.2.4 The controlport rcip addr command is only allowed for node/slot/port combinations where

10.19InForm OS Version 2.2.4 Command Line Interface Reference Resetting a port causes a momentary dip in throughput, but no loss of connectivity. Pe

10.20Command Line Interface Reference InForm OS Version 2.2.4

InForm OS Version 2.2.4 Command Line Interface Reference11.1Create Commands11Create CommandsIn this chapter createald 11.3 createaldvv 11.9 cre

11.2Command Line Interface Reference InForm OS Version 2.2.4 createtpvv 11.56 createuser 11.59 createvlun 11.61 createvv 11.64 createvvcopy

11.3InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDcreatealdDESCRIPTIONThis command was deprecated in the 2.2.3 release and will be ch

xiiiTable of Contents InForm OS Version 2.2.4 Command Line Interface Referencecreatehost 11.34createld 11.37creatercopygroup 11.40creatercopytarget

11.4Command Line Interface Reference InForm OS Version 2.2.4–rs <size>Specifies the number of sets in a row using an integer from 1 through 2147

11.5InForm OS Version 2.2.4 Command Line Interface Reference–p <pattern>Specifies a pattern for disks. Patterns are used to select disks that ar

11.6Command Line Interface Reference InForm OS Version 2.2.4–mg <item>Specifies one or more drive magazines. Drive magazines are identified by o

11.7InForm OS Version 2.2.4 Command Line Interface Reference–fc_lt <number>Specifies that physical disks with free chunklets less than the numbe

11.8Command Line Interface Reference InForm OS Version 2.2.4EXAMPLESThe following example displays the creation of a 256 MB logical disk named testld.

11.9InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDcreatealdvvDESCRIPTIONThis command was deprecated in the 2.2.3 release and will be

11.10Command Line Interface Reference InForm OS Version 2.2.4–ssz <size_number_chunklet>Specifies the set size in number of chunklets. The defau

11.11InForm OS Version 2.2.4 Command Line Interface Reference–i <VV_ID>Specifies the ID of the created virtual volume. If not specified, the vir

11.12Command Line Interface Reference InForm OS Version 2.2.4stale_ssSpecifies that invalid snapshot volumes are permitted. Failure to update snapshot

11.13InForm OS Version 2.2.4 Command Line Interface Reference–st <item>Specifies one or more PCI slots. Slots are identified by one or more inte

xivTable of Contents Command Line Interface Reference InForm OS Version 2.2.4histport 15.18histvlun 15.22histvv 15.2716 Locate Commandslocatecage

11.14Command Line Interface Reference InForm OS Version 2.2.4–tc_gt <number>Specifies that physical disks with total chunklets greater than the

11.15InForm OS Version 2.2.4 Command Line Interface Reference<size>[g|G]Specifies the size for the user volume in MB (maximum of 2096128 MB). Th

11.16Command Line Interface Reference InForm OS Version 2.2.4disks that must be created in units of the logical disk RAID set size. See the InForm OS

11.17InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDcreateavvDESCRIPTIONThe createavv command creates a virtual volume where logical d

11.18Command Line Interface Reference InForm OS Version 2.2.4–al <percent>Specifies the virtual volume’s allocation limit. The snapshot data spa

11.19InForm OS Version 2.2.4 Command Line Interface ReferenceSPECIFIERS<VV_name>Specifies the virtual volume name, using up to 31 characters. Th

11.20Command Line Interface Reference InForm OS Version 2.2.4EXAMPLESThe following example displays the creation of virtual volume vv0 with its user s

11.21InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDcreatecpgDESCRIPTIONThe createcpg command creates a Common Provisioning Group (CPG

11.22Command Line Interface Reference InForm OS Version 2.2.4–sdgs <size>Specifies the amount of logical disk storage created on each auto-grow

11.23InForm OS Version 2.2.4 Command Line Interface Reference-t <RAID_type> Specifies the RAID type: r0, r1, or r5. The default is r1.-ssz <s

xvTable of Contents InForm OS Version 2.2.4 Command Line Interface Referenceremovetask 19.23removetemplate 19.25removeuser 19.27removeuserconn 19.

11.24Command Line Interface Reference InForm OS Version 2.2.4–nd <item>Specifies one or more nodes. Nodes are identified by one or more integers

11.25InForm OS Version 2.2.4 Command Line Interface Reference–dk <item>Specifies one or more physical disks. Disks are identified by one or more

11.26Command Line Interface Reference InForm OS Version 2.2.4Disks that satisfy all of the specified characteristics are used. For example, -p -fc_gt

11.27InForm OS Version 2.2.4 Command Line Interface Referencebe created in units of the logical disk RAID set size. See the InForm OS Concepts Guide f

11.28Command Line Interface Reference InForm OS Version 2.2.4COMMANDcreatedomainDESCRIPTIONThe createdomain command creates system domains.AUTHORITYSu

11.29InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDcreategroupsvDESCRIPTIONThe creategroupsv command creates consistent group snapsho

11.30Command Line Interface Reference InForm OS Version 2.2.4RESTRICTIONSNone.EXAMPLESIn the following example, virtual volumes VV1 and VV2, and their

11.31InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDcreategroupvvcopyDESCRIPTIONThe creategroupvvcopy command creates consistent group

11.32Command Line Interface Reference InForm OS Version 2.2.4–haltCancels an ongoing physical copy or snapshot promotion. This causes the destination

11.33InForm OS Version 2.2.4 Command Line Interface Reference Consistent group snapshots are all created at the same point in time so that related st

xviTable of Contents Command Line Interface Reference InForm OS Version 2.2.4setrcopygroup 21.51setrcopytarget 21.57setsnmppw 21.61setsshkey 21.63

11.34Command Line Interface Reference InForm OS Version 2.2.4COMMANDcreatehostDESCRIPTIONThe createhost command creates or adds paths to a new system

11.35InForm OS Version 2.2.4 Command Line Interface Reference-iscsiIndicates that any specified host paths are iSCSI names.-loc <location>Specif

11.36Command Line Interface Reference InForm OS Version 2.2.4EXAMPLESThe following example creates system host test:NOTES A host can be created witho

11.37InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDcreateldDESCRIPTIONThis command was deprecated in the 2.2.3 release and will be ch

11.38Command Line Interface Reference InForm OS Version 2.2.4–ps <parityset>Specifies the number of chunklets in the RAID set. This option and a

11.39InForm OS Version 2.2.4 Command Line Interface ReferenceEXAMPLESThe following example displays the creation of RAID 1 logical disk test2.NOTES V

11.40Command Line Interface Reference InForm OS Version 2.2.4COMMANDcreatercopygroupDESCRIPTIONThe creatercopygroup command creates a Remote Copy volu

11.41InForm OS Version 2.2.4 Command Line Interface ReferenceEXAMPLESThe following example creates an asynchronous periodic mode volume group named Gr

11.42Command Line Interface Reference InForm OS Version 2.2.4COMMANDcreatercopytargetDESCRIPTIONThe creatercopytarget command creates a Remote Copy ta

11.43InForm OS Version 2.2.4 Command Line Interface ReferenceRESTRICTIONSFunctionality of this command requires the 3PAR Remote Copy license. Contact

xviiTable of Contents InForm OS Version 2.2.4 Command Line Interface Referenceshowiscsisession 22.47showld 22.49showldch 22.55showldmap 22.60showl

11.44Command Line Interface Reference InForm OS Version 2.2.4COMMANDcreatespareDESCRIPTIONThe createspare command allocates chunklet resources as spar

11.45InForm OS Version 2.2.4 Command Line Interface Referencea:<chunklet_num>Specifies a chunklet number on all physical disks. This specifier c

11.46Command Line Interface Reference InForm OS Version 2.2.4COMMANDcreatesvDESCRIPTIONThe createsv command creates a point-in-time (snapshot) copy of

11.47InForm OS Version 2.2.4 Command Line Interface ReferenceThe following example creates snapshot volume svrw_vv0 from the snapshot svro_vv0:NOTESA

11.48Command Line Interface Reference InForm OS Version 2.2.4COMMANDcreatetemplateDESCRIPTIONThe createtemplate command creates virtual volume (VV), l

11.49InForm OS Version 2.2.4 Command Line Interface Reference–ssz <size_number_chunklets>Specifies the set size in the number of chunklets. Ente

11.50Command Line Interface Reference InForm OS Version 2.2.4–st <item>Specifies one or more PCI slots. Slots are identified by one or more inte

11.51InForm OS Version 2.2.4 Command Line Interface Reference–tc_gt <number>Specifies that physical disks with total chunklets greater than the

11.52Command Line Interface Reference InForm OS Version 2.2.4–cpg <CPG_name>Specifies that the snapshot data space and snapshot administration s

11.53InForm OS Version 2.2.4 Command Line Interface Reference–pol no_stale_ss|stale_ss|one_host|no_one_host|tp_bzero|no_tp_bzeroSpecifies the policy t

xviiiTable of Contents Command Line Interface Reference InForm OS Version 2.2.4showtarget 22.147showtask 22.148showtemplate 22.152showtoc 22.154sh

11.54Command Line Interface Reference InForm OS Version 2.2.4–sdgs <size>Specifies the amount of logical disk storage created on each auto-grow

11.55InForm OS Version 2.2.4 Command Line Interface ReferenceEXAMPLESThe following example creates a virtual volume called vvr1. The –ha and –pol opti

11.56Command Line Interface Reference InForm OS Version 2.2.4COMMANDcreatetpvvDESCRIPTIONThis command was deprecated in the 2.2.3 release and will be

11.57InForm OS Version 2.2.4 Command Line Interface Reference–al <percent>Specifies the TPVV’s allocation limit. The snapshot data space of the

11.58Command Line Interface Reference InForm OS Version 2.2.4portion of the data page to ensure that the host cannot read data from deleted volumes or

11.59InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDcreateuserDESCRIPTIONThe createuser command allows a Super user to create a new us

11.60Command Line Interface Reference InForm OS Version 2.2.4<privilege_level>Specifies the privilege level you wish to assign to the created us

11.61InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDcreatevlunDESCRIPTION The createvlun command creates a VLUN template that enables

11.62Command Line Interface Reference InForm OS Version 2.2.4–cnt <number>Specifies that a sequence of VLUNs, as specified by the num argument,

11.63InForm OS Version 2.2.4 Command Line Interface ReferenceRESTRICTIONSNone.EXAMPLESThe following example exports virtual volume test on LUN 2:NOTES

xixTable of Contents InForm OS Version 2.2.4 Command Line Interface Referencestatiscsisession 25.16statld 25.18statlink 25.23statpd 25.25statport

11.64Command Line Interface Reference InForm OS Version 2.2.4COMMANDcreatevvDESCRIPTIONThe createvv command creates volumes that are provisioned from

11.65InForm OS Version 2.2.4 Command Line Interface Referencenames of the volumes are <VV_name>.0 through <VV_name>.<count-1>. If th

11.66Command Line Interface Reference InForm OS Version 2.2.4any deleted volumes or snapshots. The current allocation page size is 16kb. This is the d

11.67InForm OS Version 2.2.4 Command Line Interface ReferenceOtherwise, the volume is fully provisioned from the specified CPG. If the name of the CPG

11.68Command Line Interface Reference InForm OS Version 2.2.4COMMANDcreatevvcopyDESCRIPTIONThe createvvcopy command creates a full physical copy of a

11.69InForm OS Version 2.2.4 Command Line Interface Reference–sSaves the snapshot of the source volume after the copy of the volume is completed. This

11.70Command Line Interface Reference InForm OS Version 2.2.4 Multiple physical copy operations can occur simultaneously. Host-initiated I/O operatio

InForm OS Version 2.2.4 Command Line Interface Reference12.1Dismiss Commands12Dismiss CommandsIn this chapter dismisspd 12.2 dismissrcopylink 12.

12.2Command Line Interface Reference InForm OS Version 2.2.4COMMANDdismisspdDESCRIPTIONThe dismisspd command removes physical disk definitions from sy

12.3InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDdismissrcopylinkDESCRIPTIONThe dismissrcopylink command removes one or more links (

Revision NoticeThis is the first release of this manual. A complete revision history is provided at the end of this manual.ChangesThe material in thi

xxTable of Contents Command Line Interface Reference InForm OS Version 2.2.431 Wait Commandwaittask 31.2IX IndexRH Revision History

12.4Command Line Interface Reference InForm OS Version 2.2.4RESTRICTIONS Functionality of this command requires a 3PAR Remote Copy license. Contact y

12.5InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDdismissrcopyvvDESCRIPTIONThe dismissrcopyvv command removes a virtual volume from a

12.6Command Line Interface Reference InForm OS Version 2.2.4NOTES The dismissrcopyvv command removes any Remote Copy synchronization snapshots affili

InForm OS Version 2.2.4 Command Line Interface Reference13.1Free Command13Free CommandIn this chapter freespace 13.2

13.2Command Line Interface Reference InForm OS Version 2.2.4COMMANDfreespaceDESCRIPTIONThe freespace command frees snapshot administration and snapsho

13.3InForm OS Version 2.2.4 Command Line Interface ReferenceRESTRICTIONSThis command can only be used to free snapshot administration and snapshot dat

13.4Command Line Interface Reference InForm OS Version 2.2.4

InForm OS Version 2.2.4 Command Line Interface Reference14.1Grow Commands14Grow CommandsIn this chapter growaldvv 14.2 growavv 14.9 growtpvv 14

14.2Command Line Interface Reference InForm OS Version 2.2.4COMMANDgrowaldvvDESCRIPTIONThe growaldvv command automatically enlarges (grows) the size o

14.3InForm OS Version 2.2.4 Command Line Interface Referenceproviding either the g or G options following (no whitespace between) the entered size val

InForm OS Version 2.2.4 Command Line Interface Reference1.1Introduction1IntroductionIn this chapterThis chapter includes the following sections:1.1

14.4Command Line Interface Reference InForm OS Version 2.2.4–ha <port>|<cage>|<mag>RAID 1 or RAID 5 can support a failure of one por

14.5InForm OS Version 2.2.4 Command Line Interface Reference–p <pattern>Specifies a pattern for disks. Patterns are used to select disks that ar

14.6Command Line Interface Reference InForm OS Version 2.2.4–mg <item>Specifies one or more drive magazines. Drive magazines are identified by o

14.7InForm OS Version 2.2.4 Command Line Interface Reference–fc_lt <number>Specifies that physical disks with free chunklets less than the numbe

14.8Command Line Interface Reference InForm OS Version 2.2.4disks of multiple device types after the grow operation. If a virtual volume currently has

14.9InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDgrowavvDESCRIPTIONThe growavv command enlarges a virtual volume with automatic mapp

14.10Command Line Interface Reference InForm OS Version 2.2.4<sa_LD_ID>Specifies the logical disks to be used as snapshot administrator space. T

14.11InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDgrowtpvvDESCRIPTIONThis command was deprecated in the 2.2.3 release and will be ch

14.12Command Line Interface Reference InForm OS Version 2.2.4EXAMPLESThe following example displays the virtual volume being grown by 1 GB, to a total

14.13InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDgrowvvDESCRIPTIONThe growvv command increases the size of a virtual volume created

1.2AudienceCommand Line Interface Reference InForm OS Version 2.2.41.1 AudienceThis reference is for system and storage administrators who monitor and

14.14Command Line Interface Reference InForm OS Version 2.2.4NOTESFor this command: KB = 1024 bytes MB = 1048576 bytes GB = 1073741824 bytes.

InForm OS Version 2.2.4 Command Line Interface Reference15.1Hist Commands15Hist CommandsIn this chapter histch 15.2 histld 15.6 histpd 15.10

15.2Command Line Interface Reference InForm OS Version 2.2.4COMMANDhistchDESCRIPTIONThe histch command displays a histogram of service times in a time

15.3InForm OS Version 2.2.4 Command Line Interface Reference–sizecols <fcol> <lcol>For the I/O size histogram, show the columns from the f

15.4Command Line Interface Reference InForm OS Version 2.2.4decSort in decreasing order.You can specify multiple columns on the command line by using

15.5InForm OS Version 2.2.4 Command Line Interface ReferenceEXAMPLESThe following example displays one iteration of a histogram of service times for s

15.6Command Line Interface Reference InForm OS Version 2.2.4COMMANDhistldDESCRIPTIONThe histld command displays a histogram of service times for logic

15.7InForm OS Version 2.2.4 Command Line Interface Reference◆ The first column includes all data accumulated for columns less than the first column an

15.8Command Line Interface Reference InForm OS Version 2.2.4–sortcol <col> [,<dir>][:<col>[,<dir>]...]Sorts command output bas

15.9InForm OS Version 2.2.4 Command Line Interface ReferenceEXAMPLESThe following example displays one iteration of a histogram of service times for a

1.3Related DocumentationInForm OS Version 2.2.4 Command Line Interface Reference1.4 Related DocumentationThe following documents also provide informat

15.10Command Line Interface Reference InForm OS Version 2.2.4COMMANDhistpdDESCRIPTIONThe histpd command displays a histogram of service times for phys

15.11InForm OS Version 2.2.4 Command Line Interface Reference–metric both|time|sizeSelects which metric to display. Metrics can be one of the followin

15.12Command Line Interface Reference InForm OS Version 2.2.4–rwSpecifies that the display includes separate read and write data. If not specified, th

15.13InForm OS Version 2.2.4 Command Line Interface Reference–niSpecifies that histograms for only nonidle devices are displayed. This option is short

15.14Command Line Interface Reference InForm OS Version 2.2.4–mg <item>Specifies one or more drive magazines. Drive magazines are identified by

15.15InForm OS Version 2.2.4 Command Line Interface Reference–devid <ID>Specifies that physical disks identified by their device IDs are selecte

15.16Command Line Interface Reference InForm OS Version 2.2.4EXAMPLESThe following example displays a histogram of service times for all physical disk

15.17InForm OS Version 2.2.4 Command Line Interface Reference Previous options –n <node_list>, –s <slot_list>, and –p <port_list> h

15.18Command Line Interface Reference InForm OS Version 2.2.4COMMANDhistportDESCRIPTIONThe histport command displays a histogram of service times for

15.19InForm OS Version 2.2.4 Command Line Interface Reference–metric both|time|sizeSelects which metric to display. Metrics can be one of the followin

1.4OrganizationCommand Line Interface Reference InForm OS Version 2.2.41.5 OrganizationThis guide is organized as follows: Chapter 1, Introduction (

15.20Command Line Interface Reference InForm OS Version 2.2.4–rwSpecifies that the display includes separate read and write data. If not specified, th

15.21InForm OS Version 2.2.4 Command Line Interface Reference–niSpecifies that histograms for only nonidle devices are displayed. This option is short

15.22Command Line Interface Reference InForm OS Version 2.2.4COMMANDhistvlunDESCRIPTIONThe histvlun command displays VLUN service time histograms.SYNT

15.23InForm OS Version 2.2.4 Command Line Interface Reference–slots <slotlist>Specifies that only exports from the specified slots are to be dis

15.24Command Line Interface Reference InForm OS Version 2.2.4–sizecols <fcol> <lcol>For the I/O size histogram, show the columns from the

15.25InForm OS Version 2.2.4 Command Line Interface Reference–sortcol <col> [,<dir>][:<col>[,<dir>]...]Sorts command output ba

15.26Command Line Interface Reference InForm OS Version 2.2.4EXAMPLESThe following example displays two iterations of a histogram of service times for

15.27InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDhistvvDESCRIPTIONThe histvv command displays virtual volume service time histogram

15.28Command Line Interface Reference InForm OS Version 2.2.4–sizecols <fcol> <lcol>For the I/O size histogram, show the columns from the

15.29InForm OS Version 2.2.4 Command Line Interface Reference–filt <fspec>Specifies that histograms below the threshold specified by the <fsp

1.5OrganizationInForm OS Version 2.2.4 Command Line Interface Reference Chapter 15, Hist Commands, includes the commands used to monitor existing ser

15.30Command Line Interface Reference InForm OS Version 2.2.4EXAMPLESThe following example displays two iterations of a histogram of service times for

InForm OS Version 2.2.4 Command Line Interface Reference16.1Locate Commands16Locate CommandsIn this chapter locatecage 16.2 locatesys 16.4

16.2Command Line Interface Reference InForm OS Version 2.2.4COMMANDlocatecageDESCRIPTIONThe locatecage command allows system administrators to locate

16.3InForm OS Version 2.2.4 Command Line Interface Reference<port_name>Indicates the port specifiers. Accepted values are A0|B0|A1|B1. If a port

16.4Command Line Interface Reference InForm OS Version 2.2.4COMMANDlocatesysDESCRIPTIONThe locatesys command helps locate a storage system by blinking

16.5InForm OS Version 2.2.4 Command Line Interface ReferenceEXAMPLESIn the following example, an InServ Storage Server is identified by blinking the L

16.6Command Line Interface Reference InForm OS Version 2.2.4

InForm OS Version 2.2.4 Command Line Interface Reference17.1Move Commands17Move CommandsIn this chapter movech 17.2 movechtospare 17.5 movepdto

17.2Command Line Interface Reference InForm OS Version 2.2.4COMMANDmovechDESCRIPTIONThe movech command moves a list of chunklets from one physical dis

17.3InForm OS Version 2.2.4 Command Line Interface Reference-ovrdPermits the moves to happen to a destination even when there will be a loss of qualit

1.6Typographical ConventionsCommand Line Interface Reference InForm OS Version 2.2.4 Chapter 30, Upgrade Commands, indicates the commands used to pro

17.4Command Line Interface Reference InForm OS Version 2.2.4◆ true. Indicates quality was lost.◆ false. Indicates quality was not lost.NOTES Chunklet

17.5InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDmovechtospareDESCRIPTIONThe movechtospare command moves data from specified physica

17.6Command Line Interface Reference InForm OS Version 2.2.4RESTRICTIONSNone.EXAMPLESIn the following example, chunklet 60 from physical disk 0 is mov

17.7InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDmovepdtospareDESCRIPTIONThe movepdtospare command moves data from specified physica

17.8Command Line Interface Reference InForm OS Version 2.2.4EXAMPLESThe following example displays a dry run of moving the data on physical disk 0 to

17.9InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDmoverelocpdDESCRIPTIONThe moverelocpd command moves chunklets that were on a physic

17.10Command Line Interface Reference InForm OS Version 2.2.4RESTRICTIONSNone.EXAMPLESThe following example moves chunklets that were on physical disk

17.11InForm OS Version 2.2.4 Command Line Interface Reference Specifying the –dr option can be used to see if the specified moves succeeds and what t

17.12Command Line Interface Reference InForm OS Version 2.2.4COMMANDmovetodomainDESCRIPTIONThe movetodomain command moves objects from one domain to a

17.13InForm OS Version 2.2.4 Command Line Interface ReferenceEXAMPLEThe following example displays the movement of virtual volume vv1 to domain Sample

1.7AdvisoriesInForm OS Version 2.2.4 Command Line Interface Reference

17.14Command Line Interface Reference InForm OS Version 2.2.4

InForm OS Version 2.2.4 Command Line Interface Reference18.1Promote Commands18Promote CommandsIn this chapter promotesv 18.2 promotevvcopy 18.4

18.2Command Line Interface Reference InForm OS Version 2.2.4COMMANDpromotesvDESCRIPTIONThe promotesv command copies the differences of a snapshot back

18.3InForm OS Version 2.2.4 Command Line Interface ReferenceRESTRICTIONS The virtual copy and its base volume must not be exported. If working with

18.4Command Line Interface Reference InForm OS Version 2.2.4COMMANDpromotevvcopyDESCRIPTIONThe promotevvcopy command promotes a physical copy back to

InForm OS Version 2.2.4 Command Line Interface Reference19.1Remove Commands19Remove CommandsIn this chapter removealert 19.3 removecpg 19.5 rem

19.2Command Line Interface Reference InForm OS Version 2.2.4 removeuser 19.27 removeuserconn 19.29 removevlun 19.31 removevv 19.33

19.3InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDremovealertDESCRIPTIONThe removealert command removes one or more alerts from the s

19.4Command Line Interface Reference InForm OS Version 2.2.4EXAMPLESThe following example displays all alerts from the system with the option to remov

19.5InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDremovecpgDESCRIPTIONThe removecpg command removes common provisioning groups (CPGs)

1.8AdvisoriesCommand Line Interface Reference InForm OS Version 2.2.4

19.6Command Line Interface Reference InForm OS Version 2.2.4–sd <LD_name>Specifies that the logical disk, as identified with the <LD_name>

19.7InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDremovedomainDESCRIPTIONThe removedomain command removes an existing domain from the

19.8Command Line Interface Reference InForm OS Version 2.2.4COMMANDremoveeventlogDESCRIPTIONThe removeeventlog command removes all debug event logs fr

19.9InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDremovehostDESCRIPTIONThe removehost command removes a system host or paths to a hos

19.10Command Line Interface Reference InForm OS Version 2.2.4RESTRICTIONSA host that has one or more VLUNs exported on it cannot be removed.EXAMPLESTh

19.11InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDremoveldDESCRIPTIONThe removeld command removes a specified logical disk from the

19.12Command Line Interface Reference InForm OS Version 2.2.4SPECIFIERS<LD_name>Specifies the logical disk name, using up to 31 characters. Mult

19.13InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDremovercopygroupDESCRIPTIONThe removercopygroup command removes a Remote Copy volu

19.14Command Line Interface Reference InForm OS Version 2.2.4 The removercopygroup command removes all the associations configured in the specified g

19.15InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDremovercopytargetDESCRIPTIONThe removercopytarget command removes target designati

InForm OS Version 2.2.4 Command Line Interface Reference2.1CLI Command Syntax and Conventions2CLI Command Syntax and ConventionsIn this chapter2.1

19.16Command Line Interface Reference InForm OS Version 2.2.4COMMANDremovesnmpmgrDESCRIPTIONThe removesnmpmgr command removes preregistered SNMP softw

19.17InForm OS Version 2.2.4 Command Line Interface Reference 0 indicates that the trap manager host was removed and the command was successful. 1 i

19.18Command Line Interface Reference InForm OS Version 2.2.4COMMANDremovesnmppwDESCRIPTIONThe removesnmppw command allows a user to remove SNMP acces

19.19InForm OS Version 2.2.4 Command Line Interface ReferenceEXIT STATUSThe following codes are returned indicating success or failure: 0 indicates t

19.20Command Line Interface Reference InForm OS Version 2.2.4COMMANDremovespareDESCRIPTIONThe removespare command removes chunklets from the spare chu

19.21InForm OS Version 2.2.4 Command Line Interface Reference–pos <cage:mag:disk:chunklet_num>Specifies the position of a specific chunklet iden

19.22Command Line Interface Reference InForm OS Version 2.2.4COMMANDremovesshkeyDESCRIPTIONThe removesshkey command removes your SSH public key to dis

19.23InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDremovetaskDESCRIPTIONThe removetask command removes information about one or more

19.24Command Line Interface Reference InForm OS Version 2.2.4RESTRICTIONSNone.EXAMPLESThe following example shows how to remove a task based on the ta

19.25InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDremovetemplateDESCRIPTIONThe removetemplate command removes one or more virtual vo

3 All advertising materials mentioning features or use of this software must display the following acknowledgement:This product includes software dev

2.2Syntax and ConventionsCommand Line Interface Reference InForm OS Version 2.2.42.1 Syntax and ConventionsMost CLI commands use the following syntax.

19.26Command Line Interface Reference InForm OS Version 2.2.4RESTRICTIONSNone.EXAMPLESThe following example displays the forced removal of template vv

19.27InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDremoveuserDESCRIPTIONThe removeuser command removes a user account from the system

19.28Command Line Interface Reference InForm OS Version 2.2.4NOTES Verify the removal of users by issuing the showuser command. See showuser on page

19.29InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDremoveuserconnDESCRIPTIONThe removeuserconn command removes user connections to th

19.30Command Line Interface Reference InForm OS Version 2.2.4RESTRICTIONSNone.EXAMPLESThe following example displays the forced removal of user user1

19.31InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDremovevlunDESCRIPTION The removevlun command removes a virtual volume’s SCSI LUN e

19.32Command Line Interface Reference InForm OS Version 2.2.4<LUN>Specifies the LUN as an integer from 0 through 65536.<node:slot:port>Spe

19.33InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDremovevvDESCRIPTIONThe removevv command removes virtual volumes from the system. S

19.34Command Line Interface Reference InForm OS Version 2.2.4–staleSpecifies that all stale volumes can be removed.SPECIFIERS<VV_name>Specifies

19.35InForm OS Version 2.2.4 Command Line Interface ReferenceIf this is a concern, remove logical disks when the virtual volume is removed and use onl

2.3Syntax RulesInForm OS Version 2.2.4 Command Line Interface Reference2.2 Syntax RulesThe command syntax described in Syntax and Conventions on page

19.36Command Line Interface Reference InForm OS Version 2.2.4

InForm OS Version 2.2.4 Command Line Interface Reference20.1Service Commands20Service CommandsIn this chapter servicecage 20.2 servicehost 20.5

20.2Command Line Interface Reference InForm OS Version 2.2.4COMMANDservicecageDESCRIPTIONThe servicecage command is necessary when executing removal a

20.3InForm OS Version 2.2.4 Command Line Interface Referenceresetfc◆ For DC3 cages, soft reset the Fibre Channel interface card.◆ For DC2 and DC4 cage

20.4Command Line Interface Reference InForm OS Version 2.2.4RESTRICTIONSNone.EXAMPLESThe following example displays the commencement of Fibre Channel

20.5InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDservicehostDESCRIPTIONThe servicehost command executes removal and replacement acti

20.6Command Line Interface Reference InForm OS Version 2.2.4OPTIONS–fSpecifies that the command is forced. If this option is not used, the command req

20.7InForm OS Version 2.2.4 Command Line Interface ReferenceThe following example displays the removal of an inactive host from port 2:1:1:NOTESNone.c

20.8Command Line Interface Reference InForm OS Version 2.2.4COMMANDservicemagDESCRIPTIONThe servicemag command executes service on a drive magazine or

20.9InForm OS Version 2.2.4 Command Line Interface ReferenceRelocation of chunklets is considered one step and can take from several minutes to severa

2.4Glob-Style PatternCommand Line Interface Reference InForm OS Version 2.2.42.3 Glob-Style PatternSeveral of the commands in this reference allow a p

20.10Command Line Interface Reference InForm OS Version 2.2.4-pdid <PD_ID_1>...<PD_ID_3>Specifies one to four physical disks (by physical

20.11InForm OS Version 2.2.4 Command Line Interface Reference cli% servicemag start –log –wait 2 0.0Begin servicemag start –log 2 0.0... disks in m

20.12Command Line Interface Reference InForm OS Version 2.2.4NOTES Issuing the servicemag command results in chunklet relocation that causes a dip in

InForm OS Version 2.2.4 Command Line Interface Reference21.1Set Commands21Set CommandsIn this chapter setalert 21.3 setauthparam 21.5 setbatter

21.2Command Line Interface Reference InForm OS Version 2.2.4 setpassword 21.47 setpd 21.49 setrcopygroup 21.51 setrcopytarget 21.57 setsnmpp

21.3InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDsetalertDESCRIPTIONThe setalert command sets the status of system alerts.SYNTAXseta

21.4Command Line Interface Reference InForm OS Version 2.2.4EXAMPLESThe following example sets the status of all system alerts as new:NOTESVerify the

21.5InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDsetauthparamDESCRIPTIONThe setauthparam command is used to set the authentication a

21.6Command Line Interface Reference InForm OS Version 2.2.4Table 21-1. Values for Specifiers <param> and <value><param> <value&

21.7InForm OS Version 2.2.4 Command Line Interface Referenceuser-dn-baseWhen using simple binding, the authentication process attempts to bind the use

2.5Typical Command Layout in this BookInForm OS Version 2.2.4 Command Line Interface ReferenceThe following actions are practical examples of the glob

21.8Command Line Interface Reference InForm OS Version 2.2.4accounts-dnIndicates the base of the subtree in the DIT in which to search for objects tha

21.9InForm OS Version 2.2.4 Command Line Interface ReferenceSome examples of the effects of domain-name-prefix are shown in Table 21-2 on page 21.10:d

21.10Command Line Interface Reference InForm OS Version 2.2.4:In the last case there is no resulting domain name because ISDom= does not appear in the

21.11InForm OS Version 2.2.4 Command Line Interface Reference The matching of a user's groups with the mapping rules is done in the order of the

21.12Command Line Interface Reference InForm OS Version 2.2.4COMMANDsetbatteryDESCRIPTIONThe setbattery command sets battery information such as the b

21.13InForm OS Version 2.2.4 Command Line Interface Reference–rSpecifies that the battery recharge time is reset and that 10 hours of charging time ar

21.14Command Line Interface Reference InForm OS Version 2.2.4COMMANDsetcageDESCRIPTIONThe setcage command enables service personnel to set or modify p

21.15InForm OS Version 2.2.4 Command Line Interface ReferenceEXAMPLESThe following example demonstrates how to assign cage1 a position description of

21.16Command Line Interface Reference InForm OS Version 2.2.4COMMANDsetcimDESCRIPTIONThe setcim command sets the properties of the CIM server, includi

21.17InForm OS Version 2.2.4 Command Line Interface Reference-https enable|disableEnables or disables the HTTPS port.-httpsport <int>Sets the HT

2.6Global Options and Environment VariablesCommand Line Interface Reference InForm OS Version 2.2.4SYNTAXSee Syntax and Conventions on page 2.2.OPTION

21.18Command Line Interface Reference InForm OS Version 2.2.4To configure the same port number for both of the HTTP and HTTPS: NOTESWhen the CIM serve

21.19InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDsetclienvDESCRIPTIONThe setclienv command sets the CLI environment parameters.SYNT

21.20Command Line Interface Reference InForm OS Version 2.2.4RESTRICTIONSNone.EXAMPLESIn the following example, the CLI environment is set to display

21.21InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDsetcpgDESCRIPTIONThe setcpg command modifies existing common provisioning groups.A

21.22Command Line Interface Reference InForm OS Version 2.2.4–sdgs <size>Specifies the growth increment, the amount of logical disk storage crea

21.23InForm OS Version 2.2.4 Command Line Interface Reference–ssz <size_number_chunklet>Specifies the set size in terms of chunklets. Enter 1 fo

21.24Command Line Interface Reference InForm OS Version 2.2.4–st <item>Specifies one or more PCI slots. Slots are identified by one or more inte

21.25InForm OS Version 2.2.4 Command Line Interface Reference–tc_gt <number>Specifies that physical disks with total chunklets greater than the

21.26Command Line Interface Reference InForm OS Version 2.2.4SPECIFIERS<CPG_name>Specifies the name of the common provisioning group being modif

21.27InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDsetdateDESCRIPTIONThe setdate command allows you to set the system time and date o

InForm OS Version 2.2.4 Command Line Interface Reference3.1Commands Quick Reference3Commands Quick ReferenceIn this section3.1 Overview 3.23.2 Dis

21.28Command Line Interface Reference InForm OS Version 2.2.4<CC>Specifies the century (CC) and cannot be used unless a year is specified (YY).

21.29InForm OS Version 2.2.4 Command Line Interface ReferenceThe following example displays the timezones with the –tzlist option: The following examp

21.30Command Line Interface Reference InForm OS Version 2.2.4The following example verifies the timezone is set to the required setting: NOTESCheck no

21.31InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDsetdomainDESCRIPTIONThe setdomain command sets the parameters and modifies the pro

21.32Command Line Interface Reference InForm OS Version 2.2.4The following example displays the addition of a comment to the domain Engineering:NOTESN

21.33InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDsethostDESCRIPTIONThe sethost command sets properties on existing system hosts, in

21.34Command Line Interface Reference InForm OS Version 2.2.4OPTIONS-loc <location>Specifies the location of the host.-ip <IP_address>Spec

21.35InForm OS Version 2.2.4 Command Line Interface ReferenceSPECIFIERS<host_name>Name of the host with a maximum of 31 characters in length.<

21.36Command Line Interface Reference InForm OS Version 2.2.4COMMANDsetlicenseDESCRIPTIONThe setlicense command sets the license key information.SYNTA

21.37InForm OS Version 2.2.4 Command Line Interface ReferenceEXAMPLESThe following example displays the setting of a license key:NOTES This command p

3.2OverviewCommand Line Interface Reference InForm OS Version 2.2.43.15 CIM Server Commands 3.233.16 Sparing Commands 3.233.17 SSH Access Comman

21.38Command Line Interface Reference InForm OS Version 2.2.4COMMANDsetnetDESCRIPTIONThe setnet command sets the administration network interface conf

21.39InForm OS Version 2.2.4 Command Line Interface ReferencestartgatewaySpecifies that if there is no gateway currently defined, then the gateway is

21.40Command Line Interface Reference InForm OS Version 2.2.4OPTIONS–fSpecifies that the operation is forced even if verification has not occurred. Th

21.41InForm OS Version 2.2.4 Command Line Interface Reference<IP_addr>Specifies the IP address of the node. This specifier can only be used with

21.42Command Line Interface Reference InForm OS Version 2.2.4the system is configured to listen as both the old and new IP addresses. When a new gatew

21.43InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDsetnodeDESCRIPTIONThe setnode command sets the properties of the node components s

21.44Command Line Interface Reference InForm OS Version 2.2.4EXAMPLEThe following example displays the node power supply:NOTENone.cli% shownode -psNod

21.45InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDsetntpDESCRIPTIONThe setntp command sets the system network time protocol (NTP) se

21.46Command Line Interface Reference InForm OS Version 2.2.4NOTESNone.

21.47InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDsetpasswordDESCRIPTIONThe setpassword command allows a user with Super level privi

3.3Domain Management CommandsInForm OS Version 2.2.4 Command Line Interface Reference3.2.2 Physical Disk Management3.3 Domain Management CommandsComm

21.48Command Line Interface Reference InForm OS Version 2.2.4RESTRICTIONS Only a user with Super level privileges can set another user’s password. P

21.49InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDsetpdDESCRIPTIONThe setpd command marks a physical disk as allocatable or non allo

21.50Command Line Interface Reference InForm OS Version 2.2.4NOTES This command can be used when the system has disks that are not to be used until a

21.51InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDsetrcopygroupDESCRIPTIONThe setrcopygroup command performs the following actions:

21.52Command Line Interface Reference InForm OS Version 2.2.4OPTIONS–tSpecifies that the setrcopygroup <dr_operations> command be applied to all

21.53InForm OS Version 2.2.4 Command Line Interface Reference–currentWhen issuing the setrcopygroup command with the reverse subcommand, only the curr

21.54Command Line Interface Reference InForm OS Version 2.2.4If no policy is specified, the no_fail_wrt_on_err and no_auto_recover policies are implem

21.55InForm OS Version 2.2.4 Command Line Interface Reference<mode_value>Specifies the mode, sync or periodic, to which the group is set. This s

21.56Command Line Interface Reference InForm OS Version 2.2.4 If the mirror_config policy is set for this group's target and the group is a prim

21.57InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDsetrcopytargetDESCRIPTIONThe setrcopytarget command sets the name, policies, and t

3.4Health and Alarm Management CommandsCommand Line Interface Reference InForm OS Version 2.2.43.4 Health and Alarm Management Commands3.4.1 Alerts3.4

21.58Command Line Interface Reference InForm OS Version 2.2.4OPTIONSNone.SPECIFIERS<target_name>Specifies the target name for the target definit

21.59InForm OS Version 2.2.4 Command Line Interface ReferenceRESTRICTIONS Functionality of this command requires the 3PAR Remote Copy license. Contac

21.60Command Line Interface Reference InForm OS Version 2.2.4necessary to temporarily change the policy to no_mirror_config in order to bring the conf

21.61InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDsetsnmppwDESCRIPTIONThe setsnmppw command allows a user to update SNMP access comm

21.62Command Line Interface Reference InForm OS Version 2.2.4The following example changes the read-only SNMP password to newpassword2 by specifying t

21.63InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDsetsshkeyDESCRIPTIONThe setsshkey command sets the SSH public key for a user.The u

21.64Command Line Interface Reference InForm OS Version 2.2.4EXAMPLESThe following example displays the setting of a user’s SSH public key:NOTES The

21.65InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDsetstatchDESCRIPTIONThe setstatch command starts and stops the statistics collecti

21.66Command Line Interface Reference InForm OS Version 2.2.4NOTESAfter the statistic collection mode for the chunklet is set, you can then use either

21.67InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDsetstatpdchDESCRIPTIONThe setstatpdch command sets the statistics collection mode

3.5Help and Utility CommandsInForm OS Version 2.2.4 Command Line Interface Reference3.5 Help and Utility Commands* You need access to all domains in

21.68Command Line Interface Reference InForm OS Version 2.2.4COMMANDsetsysDESCRIPTIONThe setsys command sets the properties of the system, and include

21.69InForm OS Version 2.2.4 Command Line Interface ReferenceSPECIFIERSThe following parameters can be configured on the system and are issued for the

21.70Command Line Interface Reference InForm OS Version 2.2.4SparingAlgorithm <value>Sets the sparing algorithm used by the admithw command. Val

21.71InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDsetsysmgrDESCRIPTIONThe setsysmgr command sets the system manager startup state.SY

21.72Command Line Interface Reference InForm OS Version 2.2.4force_iderecoverySpecifies that the system starts the recovery process from the IDE disk

21.73InForm OS Version 2.2.4 Command Line Interface ReferenceNOTES If the wipe subcommand is specified, all system data and configuration information

21.74Command Line Interface Reference InForm OS Version 2.2.4COMMANDsettemplateDESCRIPTIONThe settemplate command modifies the properties of existing

21.75InForm OS Version 2.2.4 Command Line Interface ReferenceEXAMPLES The following example displays template vvtemp1 modified to support the availab

21.76Command Line Interface Reference InForm OS Version 2.2.4COMMANDsetuserDESCRIPTIONThe setuser command sets your user properties.SYNTAXsetuser [opt

21.77InForm OS Version 2.2.4 Command Line Interface ReferenceRESTRICTIONSThe -adddomain and -rmdomain options cannot be used on a user that is current

Modifications to this software may be copyrighted by their authors and need not follow the licensing terms described here, provided that the new term

3.6Task Management CommandsCommand Line Interface Reference InForm OS Version 2.2.43.6 Task Management Commands3.7 LDAP Management CommandsCommand De

21.78Command Line Interface Reference InForm OS Version 2.2.4COMMANDsetuseraclDESCRIPTIONThe setuseracl command sets the access control list (ACL).SYN

21.79InForm OS Version 2.2.4 Command Line Interface ReferenceEXAMPLESThe following example sets the ACL for user testuser1 and allows testuser1 to upd

21.80Command Line Interface Reference InForm OS Version 2.2.4COMMANDsetvvDESCRIPTIONThe setvv command changes the properties associated with a virtual

21.81InForm OS Version 2.2.4 Command Line Interface Referenceno_one_hostThis policy should only be used when exporting a virtual volume to multiple ho

21.82Command Line Interface Reference InForm OS Version 2.2.4-snp_cpg <snp_cpg>Specifies that the volume snapshot space is to be provisioned fro

21.83InForm OS Version 2.2.4 Command Line Interface ReferenceRESTRICTIONSAt least one option must be specified.EXAMPLESThe following example sets the

21.84Command Line Interface Reference InForm OS Version 2.2.4

InForm OS Version 2.2.4 Command Line Interface Reference22.1Show Commands22Show CommandsIn this chapter showalert 22.4 showauthparam 22.6 showb

22.2Command Line Interface Reference InForm OS Version 2.2.4 showiscsisession 22.47 showld 22.49 showldch 22.55 showldmap 22.60 showlicense

22.3InForm OS Version 2.2.4 Command Line Interface Reference showsysmgr 22.144 showtarget 22.147 showtask 22.148 showtemplate 22.152 showtoc

3.7Licensing Management CommandsInForm OS Version 2.2.4 Command Line Interface Reference3.8 Licensing Management Commands3.9 Node Subsystem Managemen

22.4Command Line Interface Reference InForm OS Version 2.2.4COMMANDshowalertDESCRIPTIONThe showalert command displays the status of system alerts. Whe

22.5InForm OS Version 2.2.4 Command Line Interface ReferenceEXAMPLESThe following example displays new alerts on a system:NOTES Set the status of ale

22.6Command Line Interface Reference InForm OS Version 2.2.4COMMANDshowauthparamDESCRIPTIONThe showauthparam command shows authentication parameters.S

22.7InForm OS Version 2.2.4 Command Line Interface ReferenceNOTESNone.

22.8Command Line Interface Reference InForm OS Version 2.2.4COMMANDshowbatteryDESCRIPTIONThe showbattery command displays battery status information i

22.9InForm OS Version 2.2.4 Command Line Interface ReferenceThe columns in the previous example are identified as follows: Node. The controller node

22.10Command Line Interface Reference InForm OS Version 2.2.4The following example displays the inventory information for the battery using the showba

22.11InForm OS Version 2.2.4 Command Line Interface Reference Node. The controller node number. PS. The power supply number. Bat. The battery ID.

22.12Command Line Interface Reference InForm OS Version 2.2.4COMMANDshowblockDESCRIPTIONThe showblock command displays block mapping information for v

22.13InForm OS Version 2.2.4 Command Line Interface ReferenceRESTRICTIONSNone.EXAMPLESThe following example displays block mapping information for blo

3.8Node Subsystem Management CommandsCommand Line Interface Reference InForm OS Version 2.2.43.9.3 Node Properties3.9.4 Node EEPROM Log3.9.5 Array and

22.14Command Line Interface Reference InForm OS Version 2.2.4The following example displays detailed block mapping information from blocks 0x100 throu

22.15InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDshowcageDESCRIPTIONThe showcage command displays information about drive cages.SYN

22.16Command Line Interface Reference InForm OS Version 2.2.4SPECIFIERS<cagename>...Specifies a drive cage name for which information is display

22.17InForm OS Version 2.2.4 Command Line Interface Reference Model. The model can be DC2, DC3, or DC4. Side. Specifies the right (1) or left (0) si

22.18Command Line Interface Reference InForm OS Version 2.2.4Specifying the –d option provides more detailed information about the drive cages. See t

22.19InForm OS Version 2.2.4 Command Line Interface ReferenceWhen the power supply is switched off, it will be reported as Off through the showcage -d

22.20Command Line Interface Reference InForm OS Version 2.2.4COMMANDshowcimDESCRIPTIONThe showcim command displays the CIM server current status, eith

22.21InForm OS Version 2.2.4 Command Line Interface Reference SLP. Indicates the SLP port state.◆ --. Cannot determine the SLP port state.◆ Enabled.

22.22Command Line Interface Reference InForm OS Version 2.2.4COMMANDshowclienvDESCRIPTIONThe showclienv command displays the CLI environment parameter

22.23InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDshowcpgDESCRIPTIONThe showcpg command displays common provisioning groups (CPGs) i

3.9Node Subsystem Management CommandsInForm OS Version 2.2.4 Command Line Interface Reference3.9.6 Network Interface ConfigurationsetsysEnables you to

22.24Command Line Interface Reference InForm OS Version 2.2.4SPECIFIERS[<CPG_name>...|<pattern>...]Specifies that common provisioning grou

22.25InForm OS Version 2.2.4 Command Line Interface Reference◆ LDs. The number of logical disks used for snapshot data space.◆ TotMB. The total snapsh

22.26Command Line Interface Reference InForm OS Version 2.2.4 LimitMB. The CPG’s snapshot data allocation limit threshold, or growth limit. GrowMB.

22.27InForm OS Version 2.2.4 Command Line Interface Reference◆ TotMB. The total logical disk MB in the SD space.◆ RTotMB. The total physical (raw) MB

22.28Command Line Interface Reference InForm OS Version 2.2.4 Sa. The values for the Snapshot Admit Space (SA). Sd. The values for the Snapshot Data

22.29InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDshowdateDESCRIPTIONThe showdate command displays the date and time for each system

22.30Command Line Interface Reference InForm OS Version 2.2.4COMMANDshowdomainDESCRIPTIONThe showdomain command displays a list of domains in a system

22.31InForm OS Version 2.2.4 Command Line Interface ReferenceEXAMPLESThe following example displays detailed information about a system’s domains:In t

22.32Command Line Interface Reference InForm OS Version 2.2.4COMMANDshoweepromDESCRIPTIONThe showeeprom command displays node EEPROM log information.S

22.33InForm OS Version 2.2.4 Command Line Interface ReferenceEXAMPLESThe following example displays the EEPROM log for all nodes:cli% showeeprom Node:

3.10Node Subsystem Management CommandsCommand Line Interface Reference InForm OS Version 2.2.43.9.7 Port InformationCommand Description Authority For

22.34Command Line Interface Reference InForm OS Version 2.2.4In the example above: Board revision indicates the 3PAR part number for the node board,

22.35InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDshoweventlogDESCRIPTIONThe showeventlog command displays the current system event

22.36Command Line Interface Reference InForm OS Version 2.2.4–endt <time>Specifies that only events before a specified time are to be shown. The

22.37InForm OS Version 2.2.4 Command Line Interface Reference–nnode <pattern>Specifies that only events from nodes that do not match the specifi

22.38Command Line Interface Reference InForm OS Version 2.2.4EXAMPLESThe following example displays the current system event log:The following example

22.39InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDshowfirmwaredbDESCRIPTIONThe showfirmwaredb command displays the current database

22.40Command Line Interface Reference InForm OS Version 2.2.4RESTRICTIONSNone.

22.41InForm OS Version 2.2.4 Command Line Interface ReferenceEXAMPLESThe following example displays the current database of firmware levels and prints

22.42Command Line Interface Reference InForm OS Version 2.2.4NOTESThe firmware information displayed by the showfirmwaredb command is used when issuin

22.43InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDshowhostDESCRIPTIONThe showhost command displays information about defined hosts a

3.11Node Subsystem Management CommandsInForm OS Version 2.2.4 Command Line Interface Reference3.9.8 Battery Management3.9.9 System Managershowportlesb

22.44Command Line Interface Reference InForm OS Version 2.2.4<pattern>...Specifies that properties are set for all hosts matching the specified

22.45InForm OS Version 2.2.4 Command Line Interface ReferenceThe following example displays host descriptor properties:The following example displays

22.46Command Line Interface Reference InForm OS Version 2.2.4 Host descriptor information is available only for hosts that have been assigned a name

22.47InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDshowiscsisessionDESCRIPTIONThe showiscsisession command shows the iSCSI sessions.

22.48Command Line Interface Reference InForm OS Version 2.2.4EXAMPLESThe following example displays the iSCSI session information:In the example above

22.49InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDshowldDESCRIPTIONThe showld command displays configuration information about the s

22.50Command Line Interface Reference InForm OS Version 2.2.4M–sortcol <col> [,<dir>][:<col>[,<dir>]...]Sorts command output b

22.51InForm OS Version 2.2.4 Command Line Interface ReferenceEXAMPLESThe following example displays information for all system logical disks:The colum

22.52Command Line Interface Reference InForm OS Version 2.2.4◆ stopping. The logical disk is being stopped; normally flushes any in-flight data to dis

22.53InForm OS Version 2.2.4 Command Line Interface ReferenceThe following example displays detailed information about the system logical disks:The co

3.12Performance Management CommandsCommand Line Interface Reference InForm OS Version 2.2.43.10 Performance Management Commands3.10.1 Chunklet Statist

22.54Command Line Interface Reference InForm OS Version 2.2.4◆ mag. A chunklet from another disk within the same drive magazine can be used as a repla

22.55InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDshowldchDESCRIPTIONThe showldch command displays configuration information about t

22.56Command Line Interface Reference InForm OS Version 2.2.4SPECIFIERS<LD_name>Specifies the logical disk name, using up to 27 characters. REST

22.57InForm OS Version 2.2.4 Command Line Interface Reference◆ normal. The chunklet is available for use.◆ normal,smag. A servicemag operation is bein

22.58Command Line Interface Reference InForm OS Version 2.2.4The following example displays information about degraded chunklets for logical disk r1.u

22.59InForm OS Version 2.2.4 Command Line Interface ReferenceThe following example displays row and set layout including pdid and pdpos for chunklets

22.60Command Line Interface Reference InForm OS Version 2.2.4COMMANDshowldmapDESCRIPTIONThe showldmap command displays the mapping from a logical disk

22.61InForm OS Version 2.2.4 Command Line Interface Reference VVName. The name of the virtual volume that contains the region. VVSp. The type of the

22.62Command Line Interface Reference InForm OS Version 2.2.4COMMANDshowlicenseDESCRIPTIONThe showlicense command displays the currently installed lic

22.63InForm OS Version 2.2.4 Command Line Interface ReferenceEXAMPLESThe following example displays the currently installed license information:The fo

3.13Performance Management CommandsInForm OS Version 2.2.4 Command Line Interface Reference3.10.2 Data Cache Memory Statistics3.10.3 Node CPU Statisti

22.64Command Line Interface Reference InForm OS Version 2.2.4COMMANDshownetDESCRIPTIONThe shownet command displays the configuration and status of the

22.65InForm OS Version 2.2.4 Command Line Interface ReferenceEXAMPLESThe following example displays the status of the system administration network in

22.66Command Line Interface Reference InForm OS Version 2.2.4COMMANDshownodeDESCRIPTIONThe shownode command displays an overview of the node specific

22.67InForm OS Version 2.2.4 Command Line Interface Reference-driveDisplays the disk drive information. –ideThe -ide option was deprecated in the 2.2.

22.68Command Line Interface Reference InForm OS Version 2.2.4◆ Failed. The node has not initialized, is offline, has mismatching kernal versions has b

22.69InForm OS Version 2.2.4 Command Line Interface ReferenceThese columns and values are described in detail in the following examples. In the examp

22.70Command Line Interface Reference InForm OS Version 2.2.4In the example above: Node. The node ID. Drive. The disk drive ID. Manufacturer. The m

22.71InForm OS Version 2.2.4 Command Line Interface Reference Serial. The serial number of the PCI card. Rev. The revision number of the PCI card.

22.72Command Line Interface Reference InForm OS Version 2.2.4◆ OK. The power supply is operating normally.◆ Failed. The power supply is operating abno

22.73InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDshownodeenvDESCRIPTIONThe shownodeenv command displays the node operating environm

3.14Performance Management CommandsCommand Line Interface Reference InForm OS Version 2.2.43.10.6 Physical Disk Statistics3.10.7 Port StatisticsComman

22.74Command Line Interface Reference InForm OS Version 2.2.4EXAMPLESThe following example displays the operating environment status for all nodes in

22.75InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDshowpatchDESCRIPTIONThe showpatch command displays patches applied to a system.SYN

22.76Command Line Interface Reference InForm OS Version 2.2.4 Obsoletes. Specifies the patch IDs deleted by this patch. Requires. Specifies the patc

22.77InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDshowpdDESCRIPTIONThe showpd command displays configuration information about a sys

22.78Command Line Interface Reference InForm OS Version 2.2.4–sortcol <col> [,<dir>][:<col>[,<dir>]...]Sorts command output ba

22.79InForm OS Version 2.2.4 Command Line Interface Reference–p <pattern>Physical disks matching the specified pattern are displayed. The follow

22.80Command Line Interface Reference InForm OS Version 2.2.4–pn <item>Specifies one or more disk positions within a drive magazine. Disk positi

22.81InForm OS Version 2.2.4 Command Line Interface Reference–devtype <FC|NL>Specifies that physical disks must have the specified device type (

22.82Command Line Interface Reference InForm OS Version 2.2.4EXAMPLESThe following example displays general information for all system physical disks:

22.83InForm OS Version 2.2.4 Command Line Interface Reference◆ invdrvblksz. The drive block size is invalid. Valid block size is 512 bytes.◆ invdrvcp.

3.15Performance Management CommandsInForm OS Version 2.2.4 Command Line Interface Reference3.10.8 System Tuner 3.10.9 Virtual LUN (Export) StatisticsC

22.84Command Line Interface Reference InForm OS Version 2.2.4 Serial. Disk manufacturer’s serial number. FW_status. Indicates whether the physical

22.85InForm OS Version 2.2.4 Command Line Interface Reference Total. Number of chunklets on the physical disk. Each chunklet occupies 256 MB of conti

22.86Command Line Interface Reference InForm OS Version 2.2.4 Corr_Rd_er. Number of chunklets with correctable read errors. UnCor_rd_er. Number of

22.87InForm OS Version 2.2.4 Command Line Interface ReferenceNOTES In the showpd output, when the position of the disk is not valid (for example, in

22.88Command Line Interface Reference InForm OS Version 2.2.4COMMANDshowpdataDESCRIPTIONThe showpdata command displays information about the preserved

22.89InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDshowpdchDESCRIPTIONThe showpdch command displays the status of selected physical d

22.90Command Line Interface Reference InForm OS Version 2.2.4–srcSpecifies that information about chunklets that are marked as sources of relocation,

22.91InForm OS Version 2.2.4 Command Line Interface Reference–st <item>Specifies one or more PCI slots. Slots are identified by one or more inte

22.92Command Line Interface Reference InForm OS Version 2.2.4–tc_gt <number>Specifies that physical disks with total chunklets greater than the

22.93InForm OS Version 2.2.4 Command Line Interface ReferenceRESTRICTIONSIf no option is specified, the showpdch command defaults to displaying inform

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributio

3.16Preserved Data CommandsCommand Line Interface Reference InForm OS Version 2.2.43.10.10 Virtual Volume Statistics3.11 Preserved Data CommandsComman

22.94Command Line Interface Reference InForm OS Version 2.2.4◆ available. The chunklet is available for use as a spare or as a logical disk.◆ ld. The

22.95InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDshowpdvvDESCRIPTIONThe showpdvv command displays the virtual volumes that are mapp

22.96Command Line Interface Reference InForm OS Version 2.2.4COMMANDshowportDESCRIPTIONThe showport command displays information about ports in the sy

22.97InForm OS Version 2.2.4 Command Line Interface Reference-rcipDisplays information specific to the Ethernet Remote Copy ports.-iscsiDisplays infor

22.98Command Line Interface Reference InForm OS Version 2.2.4EXAMPLESThe following example displays information about all ports in the system:The colu

22.99InForm OS Version 2.2.4 Command Line Interface Reference◆ non_participate. Port is logically isolated from the Fibre Channel loop.◆ offline. The

22.100Command Line Interface Reference InForm OS Version 2.2.4 Mode. Indicates whether the port is an initiator or a target. Initiators connect to di

22.101InForm OS Version 2.2.4 Command Line Interface Reference MaxRate. Indicates the maximum bit rate of transfer between the HBA and the host or di

22.102Command Line Interface Reference InForm OS Version 2.2.4 Rate. Data transfer rate (bitrate) for the Remote Copy interface. Type. Indicates th

22.103InForm OS Version 2.2.4 Command Line Interface Reference Rate. Data transfer rate for the Remote Copy interface. Duplex. Values can be either

3.17Replication CommandsInForm OS Version 2.2.4 Command Line Interface Reference3.12 Replication Commands3.12.1 Physical Copy 3.12.2 Remote CopyComman

22.104Command Line Interface Reference InForm OS Version 2.2.4The following examples display both standard and detailed information about SFPs attache

22.105InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDshowportarpDESCRIPTIONThe showportarp command shows the ARP table for iSCSI ports

22.106Command Line Interface Reference InForm OS Version 2.2.4In the example output above: HwAddr. The MAC address of a remote host discovered throug

22.107InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDshowportdevDESCRIPTIONThe showportdev command displays detailed information about

22.108Command Line Interface Reference InForm OS Version 2.2.4slotSpecifies the PCI bus slot in the specified node using a number from 0 through 5.por

22.109InForm OS Version 2.2.4 Command Line Interface Reference flen. The maximum received frame length that is located in PLOGI_ACC class-3 word 1, b

22.110Command Line Interface Reference InForm OS Version 2.2.4COMMANDshowportisnsDESCRIPTIONThe showportisns command shows iSNS host information for i

22.111InForm OS Version 2.2.4 Command Line Interface ReferenceWhere N:S:P. Represents the node:slot:port of the iSCSI port. Host_IPAddr. The IP addr

22.112Command Line Interface Reference InForm OS Version 2.2.4COMMANDshowportlesbDESCRIPTIONThe showportlesb command displays Fibre Channel Link Error

22.113InForm OS Version 2.2.4 Command Line Interface ReferencediffhistDisplays differences between historical samples of LESB counters on the specifie

3.18Replication CommandsCommand Line Interface Reference InForm OS Version 2.2.4creatercopytargetCreates a target for Remote Copy.Super, Edit* creater

22.114Command Line Interface Reference InForm OS Version 2.2.4SPECIFIERS<node:slot:port>Specifies a port. This specifier is required for the sin

22.115InForm OS Version 2.2.4 Command Line Interface ReferenceThe following example displays the comparison of all ports:cli% showportlesb comparePort

22.116Command Line Interface Reference InForm OS Version 2.2.4The following example displays the counters for port 1:0:2:The columns in the previous e

22.117InForm OS Version 2.2.4 Command Line Interface Reference PrimSeq. Primitive Sequence Protocol Error. There were errors during the transmission

22.118Command Line Interface Reference InForm OS Version 2.2.4COMMANDshowrcopyDESCRIPTIONThe showrcopy command displays details of the Remote Copy con

22.119InForm OS Version 2.2.4 Command Line Interface ReferenceRESTRICTIONSFunctionality of this command requires the 3PAR Remote Copy license. Contact

22.120Command Line Interface Reference InForm OS Version 2.2.4 New. Volume is configured, but has not yet been started. Syncing. Volume is currently

22.121InForm OS Version 2.2.4 Command Line Interface Reference◆ Starting. Currently attempting to start the group.◆ Started. Group is started (has Rem

22.122Command Line Interface Reference InForm OS Version 2.2.4 To limit the performance impact of Remote Copy on the rest of the InServ storage syste

22.123InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDshowrctransportDESCRIPTIONThe showrctransport command shows status and informatio

3.19Replication CommandsInForm OS Version 2.2.4 Command Line Interface ReferenceshowrctransportShows status and information about end-to-end transport

22.124Command Line Interface Reference InForm OS Version 2.2.4 Peer_Address. IP address of the Remote Copy storage server port connected to this Remo

22.125InForm OS Version 2.2.4 Command Line Interface Reference IPAddress. IP address of the Ethernet port indicated in the N:S:P column. PeerIPAddr

22.126Command Line Interface Reference InForm OS Version 2.2.4COMMANDshowrsvDESCRIPTIONThe showrsv command displays SCSI reservation and registration

22.127InForm OS Version 2.2.4 Command Line Interface ReferenceEXAMPLESThe following example displays information about reservation and registration in

22.128Command Line Interface Reference InForm OS Version 2.2.4COMMANDshowsnmppwDESCRIPTIONThe showsnmppw command displays the SNMP community string pa

22.129InForm OS Version 2.2.4 Command Line Interface ReferenceNOTESSNMP passwords are registered using the setsnmppw command. See setsnmppw on page 21

22.130Command Line Interface Reference InForm OS Version 2.2.4COMMANDshowsnmpmgrDESCRIPTIONThe showsnmpmgr command retrieves a list of registered SNMP

22.131InForm OS Version 2.2.4 Command Line Interface Reference 0 indicates that the trap manager list was retrieved and that the command was successf

22.132Command Line Interface Reference InForm OS Version 2.2.4COMMANDshowspaceDESCRIPTIONThe showspace command displays estimated free space for logic

22.133InForm OS Version 2.2.4 Command Line Interface Reference–ss <size_KB>Specifies the step size in kilobytes using 32, 64, 128, 256, or 512.

3.20Service CommandsCommand Line Interface Reference InForm OS Version 2.2.43.12.3 Virtual Copy 3.13 Service Commands3.13.1 Disk Enclosure Command Des

22.134Command Line Interface Reference InForm OS Version 2.2.4–cg <item>Specifies one or more drive cages. Drive cages are identified by one or

22.135InForm OS Version 2.2.4 Command Line Interface Reference–devid <ID>Specifies that physical disks identified by their device IDs are select

22.136Command Line Interface Reference InForm OS Version 2.2.4COMMANDshowspareDESCRIPTIONThe showspare command displays information about chunklets in

22.137InForm OS Version 2.2.4 Command Line Interface Reference LdCh. The position of the chunklet on the logical disk. State. The state of the chunk

22.138Command Line Interface Reference InForm OS Version 2.2.4 Cl. The clean status of the chunklet. N indicates that the chunklet is in-use. Y indic

22.139InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDshowsysDESCRIPTIONThe showsys command displays an overview of the InServ Storage

22.140Command Line Interface Reference InForm OS Version 2.2.4SPECIFIERSNone.RESTRICTIONSNone.EXAMPLESThe following example displays information about

22.141InForm OS Version 2.2.4 Command Line Interface ReferenceThe following example displays the system capacity in MB for an InServ Storage Server:cl

22.142Command Line Interface Reference InForm OS Version 2.2.4The following example displays more detailed (–d option) information about the same stor

22.143InForm OS Version 2.2.4 Command Line Interface Reference(PR). If the PR is not available (most likely because of problems with the admin volume)

3.21Service CommandsInForm OS Version 2.2.4 Command Line Interface Reference3.13.2 General System Maintenance3.13.3 System Upgrade upgradecageUpgrades

22.144Command Line Interface Reference InForm OS Version 2.2.4COMMANDshowsysmgrDESCRIPTIONThe showsysmgr displays startup state information about the

22.145InForm OS Version 2.2.4 Command Line Interface ReferenceIf the system has attempted powerfail recovery three times, and during the recovery atte

22.146Command Line Interface Reference InForm OS Version 2.2.4disks and virtual volumes upon restarting. See setsysmgr on page 21.71 for more informat

22.147InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDshowtargetDESCRIPTIONThe showtarget command displays information about unrecogniz

22.148Command Line Interface Reference InForm OS Version 2.2.4COMMANDshowtaskDESCRIPTIONThe showtask command displays information about tasks. By defa

22.149InForm OS Version 2.2.4 Command Line Interface ReferenceEXAMPLESThe following example displays all tasks on a system. In this case, the last tas

22.150Command Line Interface Reference InForm OS Version 2.2.4◆ Cancelled. The task was canceled by you. ◆ Failed. The task failed to complete because

22.151InForm OS Version 2.2.4 Command Line Interface ReferenceNOTES See the InForm OS CLI Administrator’s Manual for additional information and examp

22.152Command Line Interface Reference InForm OS Version 2.2.4COMMANDshowtemplateDESCRIPTIONThe showtemplate command displays existing templates that

22.153InForm OS Version 2.2.4 Command Line Interface ReferenceNOTESIf no options are specified, all existing templates are displayed.

3.22SNMP Agent CommandsCommand Line Interface Reference InForm OS Version 2.2.43.14 SNMP Agent CommandsCommand Description Authority For Details Seead

22.154Command Line Interface Reference InForm OS Version 2.2.4COMMANDshowtocDESCRIPTIONThe showtoc command displays the system table of contents summa

22.155InForm OS Version 2.2.4 Command Line Interface ReferenceNOTESNone.

22.156Command Line Interface Reference InForm OS Version 2.2.4COMMANDshowtocgenDESCRIPTIONThe showtocgen command displays the table of contents genera

22.157InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDshowuserDESCRIPTIONThe showuser command displays information about one or all use

22.158Command Line Interface Reference InForm OS Version 2.2.4OPTIONS-kShows when users have set a public SSH key.-onelineShows all information about

22.159InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDshowuseraclDESCRIPTIONThe showuseracl command displays a user’s access control li

22.160Command Line Interface Reference InForm OS Version 2.2.4COMMANDshowuserconnDESCRIPTIONThe showuserconn command displays information about users

22.161InForm OS Version 2.2.4 Command Line Interface ReferenceEXAMPLESThe following example displays information about user connections: The columns i

22.162Command Line Interface Reference InForm OS Version 2.2.4COMMANDshowversionDESCRIPTIONThe showversion command displays information about the stor

22.163InForm OS Version 2.2.4 Command Line Interface ReferenceEXAMPLESThe following example displays comprehensive information about the system softwa

3.23CIM Server CommandsInForm OS Version 2.2.4 Command Line Interface Reference3.15 CIM Server Commands3.16 Sparing CommandsCommand Description Author

22.164Command Line Interface Reference InForm OS Version 2.2.4COMMANDshowvlunDESCRIPTIONThe showvlun command displays information about VLUNs in the s

22.165InForm OS Version 2.2.4 Command Line Interface Reference–nodes <nodelist>Requests that only VLUNs for specific nodes are displayed. The no

22.166Command Line Interface Reference InForm OS Version 2.2.4RESTRICTIONSNone.EXAMPLESThe following example displays all active and template VLUNs:cl

22.167InForm OS Version 2.2.4 Command Line Interface ReferenceThe following example displays all active and template VLUNs using glob-style patterns:T

22.168Command Line Interface Reference InForm OS Version 2.2.4 Previous options –n <node_list>, –s <slot_list>, and –p <port_list>

22.169InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDshowvvDESCRIPTIONThe showvv command displays information about all virtual volume

22.170Command Line Interface Reference InForm OS Version 2.2.4using a comma-separated list (for example -domain <domain_name>,<domain_name>

22.171InForm OS Version 2.2.4 Command Line Interface Reference–snapspaceDisplays the snapspace for the virtual volume.–cpgallocShows CPGs from which a

22.172Command Line Interface Reference InForm OS Version 2.2.4EXAMPLESThe following example displays information about all virtual volumes: The column

22.173InForm OS Version 2.2.4 Command Line Interface Reference BsID. If the virtual volume is a base volume or a physical copy, the base volume ID nu

3.24SSH Access CommandsCommand Line Interface Reference InForm OS Version 2.2.43.17 SSH Access CommandsmovepdtospareMoves specified physical disks to

22.174Command Line Interface Reference InForm OS Version 2.2.4The following example displays detailed information about the system’s virtual volumes:T

22.175InForm OS Version 2.2.4 Command Line Interface Reference Name. The name of the virtual volume. Domain. The domain to which the virtual volume

22.176Command Line Interface Reference InForm OS Version 2.2.4The columns in the previous example are identified as follows: Id. The virtual volume I

22.177InForm OS Version 2.2.4 Command Line Interface Reference◆ PhCp. The virtual volume is a physical copy. BsID. If the virtual volume is a base vo

22.178Command Line Interface Reference InForm OS Version 2.2.4COMMANDshowvvmapDESCRIPTIONThe showvvmap command displays information about how virtual

22.179InForm OS Version 2.2.4 Command Line Interface ReferenceThe columns in the previous example are identified as follows: Space. The type of the s

22.180Command Line Interface Reference InForm OS Version 2.2.4COMMANDshowvvpdDESCRIPTIONThe showvvpd command displays virtual volume distribution acro

22.181InForm OS Version 2.2.4 Command Line Interface Referenceinformation for all virtual volumes in the system is displayed. See Glob-Style Pattern o

22.182Command Line Interface Reference InForm OS Version 2.2.4EXAMPLESThe following example displays information about multiple virtual volumes. In th

22.183InForm OS Version 2.2.4 Command Line Interface ReferenceFor the example above, if you only specified a single volume you would get the same resu

3.25User Management CommandsInForm OS Version 2.2.4 Command Line Interface Reference3.18 User Management CommandsCommand Description Authority For Det

22.184Command Line Interface Reference InForm OS Version 2.2.4The following example displays information for a specific column:NOTES The command prin

22.185InForm OS Version 2.2.4 Command Line Interface Referencefor all the virtual volumes that match the <VV_name> or <pattern> list. This

22.186Command Line Interface Reference InForm OS Version 2.2.4

InForm OS Version 2.2.4 Command Line Interface Reference23.1Shutdown Commands23Shutdown CommandsIn this chapter shutdownnode 23.2 shutdownsys 23.

23.2Command Line Interface Reference InForm OS Version 2.2.4COMMANDshutdownnodeDESCRIPTIONThe shutdownnode command shuts down a system node.SYNTAXshut

23.3InForm OS Version 2.2.4 Command Line Interface ReferenceEXAMPLESThe following example shuts down system node 0 and halts the restarting of the nod

23.4Command Line Interface Reference InForm OS Version 2.2.4COMMANDshutdownsysDESCRIPTIONThe shutdownsys command shuts down an entire system.SYNTAXshu

23.5InForm OS Version 2.2.4 Command Line Interface ReferenceEXAMPLESThe following example shuts down and then restarts the system:NOTES After the shu

23.6Command Line Interface Reference InForm OS Version 2.2.4

InForm OS Version 2.2.4 Command Line Interface Reference24.1Start Commands24Start CommandsIn this chapter startcim 24.2 startld 24.3 startrcopy

Redistribution and use of the libssl OpenSSL library in source and binary forms, with or without modification, is permitted provided that the followi

3.26Volume Management CommandsCommand Line Interface Reference InForm OS Version 2.2.43.19 Volume Management Commands3.19.1 Common Provisioning Group

24.2Command Line Interface Reference InForm OS Version 2.2.4COMMANDstartcimDESCRIPTIONThe startcim command starts the CIM server to service CIM reques

24.3InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDstartldDESCRIPTIONThe startld command starts data services on a logical disk that h

24.4Command Line Interface Reference InForm OS Version 2.2.4COMMANDstartrcopyDESCRIPTIONThe startrcopy command enables Remote Copying.SYNTAXstartrcopy

24.5InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDstartrcopygroupDESCRIPTIONThe startrcopygroup command turns on Remote Copy for the

24.6Command Line Interface Reference InForm OS Version 2.2.4NOTES If a group’s target has the mirror_config policy set and the group is a primary gro

24.7InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDstartvvDESCRIPTIONThe startvv command starts data services on a virtual volume that

24.8Command Line Interface Reference InForm OS Version 2.2.4

InForm OS Version 2.2.4 Command Line Interface Reference25.1Stat Commands25Stat CommandsIn this chapter statch 25.2 statcmp 25.8 statcpu 25.10

25.2Command Line Interface Reference InForm OS Version 2.2.4COMMANDstatchThe statch command displays chunklet statistics in a timed loop.SYNTAXstatch

25.3InForm OS Version 2.2.4 Command Line Interface Reference–sortcol <col> [,<dir>][:<col>[,<dir>]...]Sorts command output bas

3.27Volume Management CommandsInForm OS Version 2.2.4 Command Line Interface Reference3.19.3 Logical Disk Management showhostDisplays defined hosts in

25.4Command Line Interface Reference InForm OS Version 2.2.4Specifies that statistics for read and write totals are displayed.<meas>The meas arg

25.5InForm OS Version 2.2.4 Command Line Interface ReferenceiopsSpecifies that I/O operations per second are displayed. If this argument is used, the

25.6Command Line Interface Reference InForm OS Version 2.2.4EXAMPLESThe following example displays the collection of statistics:For the previous examp

25.7InForm OS Version 2.2.4 Command Line Interface Reference Util % Avg. The percentage of average use.NOTES If no options are used, the command def

25.8Command Line Interface Reference InForm OS Version 2.2.4COMMANDstatcmpDESCRIPTIONThe statcmp command displays Cache Memory Page (CMP) statistics b

25.9InForm OS Version 2.2.4 Command Line Interface ReferenceRESTRICTIONSNone.EXAMPLESThe following example displays one iteration of CMP statistics fo

25.10Command Line Interface Reference InForm OS Version 2.2.4COMMANDstatcpuDESCRIPTIONThe statcpu command displays CPU statistics for all nodes.SYNTAX

25.11InForm OS Version 2.2.4 Command Line Interface ReferenceEXAMPLESThe following example displays two iterations of CPU statistics for all nodes:NOT

25.12Command Line Interface Reference InForm OS Version 2.2.4COMMANDstatiscsiDESCRIPTIONThe statiscsi command displays the iSCSI statistics. SYNTAXsta

25.13InForm OS Version 2.2.4 Command Line Interface ReferenceThis option cannot be used with the -prot option. If the -fullcounts option is not specif

3.28Volume Management CommandsCommand Line Interface Reference InForm OS Version 2.2.43.19.4 Space and Storage Management Command Description Authorit

25.14Command Line Interface Reference InForm OS Version 2.2.4EXAMPLESThe following example displays basic iSCSI statistics collection:The following ex

25.15InForm OS Version 2.2.4 Command Line Interface ReferenceNOTESThe statistics for the TCP, IP, and iSCSI protocols listed are the combined values f

25.16Command Line Interface Reference InForm OS Version 2.2.4COMMANDstatiscsisessionDESCRIPTIONThe statiscsisession command displays the iSCSI session

25.17InForm OS Version 2.2.4 Command Line Interface ReferenceSPECIFIERSNone.RESTRICTIONSNone.EXAMPLESThe following example displays the session statis

25.18Command Line Interface Reference InForm OS Version 2.2.4COMMANDstatldDESCRIPTIONThe statld command displays read/write (I/O) statistics about log

25.19InForm OS Version 2.2.4 Command Line Interface Reference–beginSpecifies that I/O averages are computed from the system start time. If not specifi

25.20Command Line Interface Reference InForm OS Version 2.2.4rSpecifies that read-only statistics are displayed.wSpecifies that write-only statistics

25.21InForm OS Version 2.2.4 Command Line Interface ReferenceSPECIFIERS<LD_name|pattern>...Only statistics are displayed for the specified logic

25.22Command Line Interface Reference InForm OS Version 2.2.4 Svt ms Max. The maximum service time in milliseconds. Svt ms Cur. The current service

25.23InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDstatlinkDESCRIPTIONThe statlink command displays statistics for link utilization f

3.29Volume Management CommandsInForm OS Version 2.2.4 Command Line Interface Reference3.19.5 Template Management 3.19.6 Virtual Volume Management Comm

25.24Command Line Interface Reference InForm OS Version 2.2.4EXAMPLESThe following example displays one iteration of statistics for the internode link

25.25InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDstatpdDESCRIPTIONThe statpd command displays the read/write (I/O) statistics for p

25.26Command Line Interface Reference InForm OS Version 2.2.4–rwSpecifies that reads and writes are displayed separately. If this option is not used,

25.27InForm OS Version 2.2.4 Command Line Interface Reference<type>The type argument can be specified with one of the following arguments:cursSp

25.28Command Line Interface Reference InForm OS Version 2.2.4<val> [k|K]|[m|M]|[g|G]Specifies the minimum threshold using any integer. The integ

25.29InForm OS Version 2.2.4 Command Line Interface Referenceseparated with a hyphen (0–5). The primary path of the disks must be on the specified por

25.30Command Line Interface Reference InForm OS Version 2.2.4–fc_gt <number>Specifies that physical disks with free chunklets greater than the n

25.31InForm OS Version 2.2.4 Command Line Interface ReferenceEXAMPLESThe following example displays one iteration of I/O statistics for all physical d

25.32Command Line Interface Reference InForm OS Version 2.2.4 KBytes per Avg. The average number of KB per second. Svt ms Max. The maximum service t

25.33InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDstatportDESCRIPTIONThe statport command displays read/write (I/O) statistics for p

3.30Volume Management CommandsCommand Line Interface Reference InForm OS Version 2.2.4createtpvvCreates a TPVV. Super, Edit createtpvv on page 11.56cr

25.34Command Line Interface Reference InForm OS Version 2.2.4–rcfcIncludes only statistics for Fibre Channel configured Remote Copy ports.–rcipInclude

25.35InForm OS Version 2.2.4 Command Line Interface Reference–filt <fspec>Specifies that statistics that fall below the threshold as specified b

25.36Command Line Interface Reference InForm OS Version 2.2.4svctSpecifies that statistics for service time in milliseconds are displayed.sizeSpecifie

25.37InForm OS Version 2.2.4 Command Line Interface Reference Port. The port ID. D/C. The Data or Control transfers. r/w. The I/O type. Values can

25.38Command Line Interface Reference InForm OS Version 2.2.4COMMANDstatrcopyDESCRIPTIONThe statrcopy command displays statistics for Remote Copy volu

25.39InForm OS Version 2.2.4 Command Line Interface ReferenceEXAMPLESThe following example shows statistics for sending links link0 and link1:The colu

25.40Command Line Interface Reference InForm OS Version 2.2.4NOTES This command repeats until directed to stop. Within the context of this command,

25.41InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDstatvlunDESCRIPTIONThe statvlun command displays statistics for virtual volumes an

25.42Command Line Interface Reference InForm OS Version 2.2.4–slots <slotlist>Specifies that export statistics from ports on the slots as listed

25.43InForm OS Version 2.2.4 Command Line Interface Reference–idlepIncludes a percent idle column in the output.–sortcol <col> [,<dir>][:&

3.31Volume Management CommandsInForm OS Version 2.2.4 Command Line Interface Reference3.19.7 Virtual LUN (Export) Management showrsvDisplays informati

25.44Command Line Interface Reference InForm OS Version 2.2.4Specifies that write-only statistics are displayed.t|rwSpecifies that statistics for read

25.45InForm OS Version 2.2.4 Command Line Interface ReferenceEXAMPLESThe following example displays one iteration of statistics for virtual volumes an

25.46Command Line Interface Reference InForm OS Version 2.2.4NOTES Previous options –n <node_list>, –s <slot_list>, and –p <port_list&

25.47InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDstatvvDESCRIPTIONThe statvv command displays statistics for virtual volumes in a t

25.48Command Line Interface Reference InForm OS Version 2.2.4incSort in increasing order (default).decSort in decreasing order.Multiple columns can be

25.49InForm OS Version 2.2.4 Command Line Interface ReferenceSpecifies that I/O operations per second are displayed. If this argument is used, the min

25.50Command Line Interface Reference InForm OS Version 2.2.4EXAMPLESThe following example displays I/O statistics for all virtual volumes:The columns

25.51InForm OS Version 2.2.4 Command Line Interface Reference In addition to external accesses by hosts, virtual volumes may be read internally by th

25.52Command Line Interface Reference InForm OS Version 2.2.4

InForm OS Version 2.2.4 Command Line Interface Reference26.1Stop Commands26Stop CommandsIn this chapter stopcim 26.2 stoprcopy 26.3 stoprcopygr

3.32Volume Management CommandsCommand Line Interface Reference InForm OS Version 2.2.4createvlunCreates a virtual volume as a SCSI LUN.Super, Edit cre

26.2Command Line Interface Reference InForm OS Version 2.2.4COMMANDstopcimDESCRIPTIONThe stopcim command stops the CIM server from servicing CIM reque

26.3InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDstoprcopyDESCRIPTIONThe stoprcopy command disables the Remote Copy functionality fo

26.4Command Line Interface Reference InForm OS Version 2.2.4EXAMPLESThe following example disables the Remote Copy functionality of all primary Remote

26.5InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDstoprcopygroupDESCRIPTIONThe stoprcopygroup command stops the Remote Copy functiona

26.6Command Line Interface Reference InForm OS Version 2.2.4 If the mirror_config policy is not set and this command is issued on a secondary group,

InForm OS Version 2.2.4 Command Line Interface Reference27.1Sync Command27Sync Command In this chapter syncrcopy 27.2

27.2Command Line Interface Reference InForm OS Version 2.2.4COMMANDsyncrcopyDESCRIPTIONThe syncrcopy command manually synchronizes Remote Copy volume

27.3InForm OS Version 2.2.4 Command Line Interface ReferenceEXAMPLEThe following example specifies that Remote Copy volume group Group1 should be sync

27.4Command Line Interface Reference InForm OS Version 2.2.4

InForm OS Version 2.2.4 Command Line Interface Reference28.1Tune Commands28Tune CommandsIn this chapter tunealdvv 28.2 tunepd 28.10 tunetpvv 28

InForm OS Version 2.2.4 Command Line Interface Reference4.1Add Command4Add Command In this chapter addsnmpmgr 4.2

28.2Command Line Interface Reference InForm OS Version 2.2.4COMMANDtunealdvvDESCRIPTIONThe tunealdvv command changes the layout of a virtual volume. T

28.3InForm OS Version 2.2.4 Command Line Interface Reference–fForces the command. The command completes without prompting for confirmation.–drSpecifie

28.4Command Line Interface Reference InForm OS Version 2.2.4–rs <size>Specifies the number of sets in a row using an integer from 1 through 2147

28.5InForm OS Version 2.2.4 Command Line Interface Referenceslots is separated with a hyphen (0–7). The primary path of the disks must be on the speci

28.6Command Line Interface Reference InForm OS Version 2.2.4–tc_lt <number>Specifies that physical disks with total chunklets less than the numb

28.7InForm OS Version 2.2.4 Command Line Interface Reference–verbose on|offSpecifies that verbose output is either enabled (on) or disabled (off). Def

28.8Command Line Interface Reference InForm OS Version 2.2.4The following example shows how to use the tunealdvv command to change the availability le

28.9InForm OS Version 2.2.4 Command Line Interface Referencewaittask command in your scripts to ensure orderly completion of the tunealdvv cancellatio

28.10Command Line Interface Reference InForm OS Version 2.2.4COMMANDtunepdDESCRIPTIONThe tunepd command identifies physical disks with high service ti

28.11InForm OS Version 2.2.4 Command Line Interface Reference–ports <portlist>Specifies that physical disks attached to the ports from the port

4.2Command Line Interface Reference InForm OS Version 2.2.4COMMANDaddsnmpmgrDESCRIPTIONThe addsnmpmgr command adds an SNMP manager to receive trap not

28.12Command Line Interface Reference InForm OS Version 2.2.4–maxpd <number>Specifies that only the indicated number of physical disks with high

28.13InForm OS Version 2.2.4 Command Line Interface ReferenceEXAMPLESIn the following example, physical disks with average service times exceeding 50

28.14Command Line Interface Reference InForm OS Version 2.2.4Note that physical disk 29 is identified as matching the search criterion of average serv

28.15InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDtunetpvvDESCRIPTIONThis command was deprecated in the 2.2.3 release and will be ch

28.16Command Line Interface Reference InForm OS Version 2.2.4RESTRICTIONS Use of this command requires a Dynamic Optimization license. Contact your l

28.17InForm OS Version 2.2.4 Command Line Interface ReferenceNOTES When canceling a tunetpvv command task, the canceltask command might return before

28.18Command Line Interface Reference InForm OS Version 2.2.4COMMANDtunevvDESCRIPTIONThe tunevv command is used to change the properties of a virtual

28.19InForm OS Version 2.2.4 Command Line Interface ReferenceOPTIONS–fForces the command. The command completes without prompting for confirmation.–wa

28.20Command Line Interface Reference InForm OS Version 2.2.4command cancellation before taking other actions. See waittask on page 31.2 for details a

InForm OS Version 2.2.4 Command Line Interface Reference29.1Update Commands29Update CommandsIn this chapter updatesnapspace 29.2 updatevv 29.4

4.3InForm OS Version 2.2.4 Command Line Interface ReferenceSPECIFIERS<host_IP_address>Specifies the IP address of the host where the manager run

29.2Command Line Interface Reference InForm OS Version 2.2.4COMMANDupdatesnapspaceDESCRIPTIONThe updatesnapspace command starts a non-cancellable task

29.3InForm OS Version 2.2.4 Command Line Interface ReferenceIssuing a waittask command displays the information about the task in process or if it has

29.4Command Line Interface Reference InForm OS Version 2.2.4COMMANDupdatevvDESCRIPTIONThe updatevv command updates a snapshot virtual volume with a ne

29.5InForm OS Version 2.2.4 Command Line Interface ReferenceEXAMPLESThe following example displays the snapshot update of snapshot virtual volume avvr

29.6Command Line Interface Reference InForm OS Version 2.2.4

InForm OS Version 2.2.4 Command Line Interface Reference30.1Upgrade Commands30Upgrade CommandsIn this chapter upgradecage 30.2 upgradepd 30.4

30.2Command Line Interface Reference InForm OS Version 2.2.4COMMANDupgradecageDESCRIPTIONThe upgradecage command downloads new firmware into the speci

30.3InForm OS Version 2.2.4 Command Line Interface Reference–file <fpname>Use firmware in file <fpname>, where <fpname> is the full

30.4Command Line Interface Reference InForm OS Version 2.2.4COMMANDupgradepdDESCRIPTIONThe upgradepd command upgrades the physical disk firmware.SYNTA

30.5InForm OS Version 2.2.4 Command Line Interface ReferenceRESTRICTIONSNone.EXAMPLESThe following example displays the upgrade of all physical disks:

Trademarks3PAR, InServ, InForm, InSpire and Serving Information are registered trademarks of 3PAR Inc.Intel and Pentium are registered trademarks of

4.4Command Line Interface Reference InForm OS Version 2.2.4

30.6Command Line Interface Reference InForm OS Version 2.2.4

InForm OS Version 2.2.4 Command Line Interface Reference31.1Wait Command31Wait CommandIn this chapter waittask 31.2

31.2Command Line Interface Reference InForm OS Version 2.2.4COMMANDwaittaskDESCRIPTIONThe waittask command asks the CLI to wait for a task to complete

31.3InForm OS Version 2.2.4 Command Line Interface ReferenceNOTES See the InForm OS CLI Administrator’s Manual for additional information and example

31.4Command Line Interface Reference InForm OS Version 2.2.4

InForm OS Version 2.2.4 Command Line Interface ReferenceIX.1IndexIndex. . . (ellipsis), multiuse option specifier 2.2() (parentheses), grouped element

IX.2IndexCommand Line Interface Reference InForm OS Version 2.2.4 Ccages, new firmware, downloading into 30.2cancel commandSee also specific commands

IX.3IndexInForm OS Version 2.2.4 Command Line Interface Reference link to remote storage server 5.6create commandsSee also specific commands (create

IX.4IndexCommand Line Interface Reference InForm OS Version 2.2.4 See also specific commands (dismiss*)dismisspd 12.2dismissrcopylink 12.3dismissrcopy

IX.5IndexInForm OS Version 2.2.4 Command Line Interface Reference histpd 15.10histport 15.18histvlun 15.22histvv 15.27host name, length limit 2.3hos

InForm OS Version 2.2.4 Command Line Interface Reference5.1Admit Commands5Admit CommandsIn this chapter admithw 5.2 admitpd 5.4 admitrcopylink

IX.6IndexCommand Line Interface Reference InForm OS Version 2.2.4 movepdtospare 17.7moverelocpd 17.9moving chunklet lists 17.2moving domains 17.12movi

IX.7IndexInForm OS Version 2.2.4 Command Line Interface Reference Registered State Change Notification (RSCN) 10.11, 22.101related documents 1.2Remo

IX.8IndexCommand Line Interface Reference InForm OS Version 2.2.4 setdate 21.27setdomain 21.31sethost 21.33setlicense 21.36setnet 21.38setnode 21.43se

IX.9IndexInForm OS Version 2.2.4 Command Line Interface Reference showrctransport 22.123showrsv 22.126showsnmpmgr 22.130showsnmppw 22.128showspace 2

IX.10IndexCommand Line Interface Reference InForm OS Version 2.2.4 physical disks 25.25virtual volumes 25.47I/O port 25.33link utilization 25.23virtua

IX.11IndexInForm OS Version 2.2.4 Command Line Interface Reference trapsremoving preregistered SNMP software 19.16using addsnmpmgr for 4.2troublesho

IX.12IndexCommand Line Interface Reference InForm OS Version 2.2.4 port presents 11.61VLUNsactive 22.164deleting 19.31information about 22.164of virtu

InForm OS Version 2.2.4 Command Line Interface ReferenceRH.1Revision HistoryRevision HistoryRelease Level Revision Summary320-200114 Rev AMarch 2009Ad

RH.2Command Line Interface Reference InForm OS Version 2.2.4

5.2Command Line Interface Reference InForm OS Version 2.2.4COMMANDadmithwDESCRIPTIONThe admithw command admits new hardware into the system. AUTHORITY

5.3InForm OS Version 2.2.4 Command Line Interface ReferenceEXAMPLESThe following example displays a passive check of the system:NOTES The admithw com

5.4Command Line Interface Reference InForm OS Version 2.2.4COMMANDadmitpdDESCRIPTIONThe admitpd command creates and admits physical disk definitions t

5.5InForm OS Version 2.2.4 Command Line Interface ReferenceNOTES Physical disks cannot be used by the InForm operating system for storage until they

5.6Command Line Interface Reference InForm OS Version 2.2.4COMMANDadmitrcopylinkDESCRIPTIONThe admitrcopylink command adds one or more links (connecti

5.7InForm OS Version 2.2.4 Command Line Interface Reference<N:S:P:WWN>...Specifies the node, slot, and port of the Fibre Channel port on the loc

5.8Command Line Interface Reference InForm OS Version 2.2.4COMMANDadmitrcopyvvDESCRIPTIONThe admitrcopyvv command adds an existing virtual volume to a

5.9InForm OS Version 2.2.4 Command Line Interface ReferenceRESTRICTIONSFunctionality of this command requires the 3PAR Remote Copy license. Contact yo

5.10Command Line Interface Reference InForm OS Version 2.2.4

InForm OS Version 2.2.4 Command Line Interface Reference6.1Cancel Command6Cancel CommandIn this chapter canceltask 6.2

6.2Command Line Interface Reference InForm OS Version 2.2.4COMMANDcanceltaskDESCRIPTIONThe canceltask command cancels one or more tasks. SYNTAX cancel

6.3InForm OS Version 2.2.4 Command Line Interface ReferenceNOTES See the 3PAR InForm OS CLI Administrator’s Manual for additional information and exa

6.4Command Line Interface Reference InForm OS Version 2.2.4

InForm OS Version 2.2.4 Command Line Interface Reference7.1Check Commands7Check CommandsIn this chapter checkld 7.2 checkpassword 7.4 checkpd 7

7.2Command Line Interface Reference InForm OS Version 2.2.4COMMANDcheckldDESCRIPTIONThe checkld command executes consistency checks of data on logical

7.3InForm OS Version 2.2.4 Command Line Interface ReferenceEXAMPLESThe following example displays a validity check of logical disk vv63.admn.0:NOTES

7.4Command Line Interface Reference InForm OS Version 2.2.4COMMANDcheckpasswordDESCRIPTIONThe checkpassword command displays authentication and author

7.5InForm OS Version 2.2.4 Command Line Interface Reference The last line of output shows the summary of the steps with the user either being unauthe

ixTable of ContentsInForm OS Version 2.2.4 Command Line Interface Reference1 Introduction1.1 Audience 1.11.2 User Interfaces 1.21.3 Supported Operat

7.6Command Line Interface Reference InForm OS Version 2.2.4COMMANDcheckpdDESCRIPTIONThe checkpd command executes surface scans or diagnostics on physi

7.7InForm OS Version 2.2.4 Command Line Interface Reference-time <secs>Indicates the number of seconds to run, from 1 to 36000. -total <size&

7.8Command Line Interface Reference InForm OS Version 2.2.4NOTES The <size> specifier can include a letter to indicate units:◆ g = gigabytes (2

7.9InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDcheckportDESCRIPTIONThe checkport command performs a loopback test on Fibre Channel

7.10Command Line Interface Reference InForm OS Version 2.2.4EXAMPLESIn the following example, the loopback test is performed on port 0:0:1 a total of

7.11InForm OS Version 2.2.4 Command Line Interface ReferenceCOMMANDcheckvvDESCRIPTIONThe checkvv command executes validity checks of virtual volume ad

7.12Command Line Interface Reference InForm OS Version 2.2.4EXAMPLESThe following example displays a validity check of virtual volume test1:NOTESNone.

InForm OS Version 2.2.4 Command Line Interface Reference8.1CLI Command8CLI CommandIn this chapter cli 8.2

8.2Command Line Interface Reference InForm OS Version 2.2.4COMMANDcliDESCRIPTIONThe cli command provides a means to set up your CLI session or to ente

8.3InForm OS Version 2.2.4 Command Line Interface Reference–pwf <passwdfile>Specifies the password file that contains the user name and encrypte