Seagate ST3250824NS Instrukcja Naprawy Pobierz pdf (Strona 17)

Release Notes 17

Updating Expansion Enclosure Firmware

If your RAID controllers are connected to expansion enclosures, after you have

upgraded the firmware for the RAID controllers as shown in the previous

instructions, update the expansion enclosure firmware for each connected expansion

controller. You must update the firmware on each expansion enclosure individually.

The upgrade process can take several minutes to complete.

Updating the Expansion Enclosure Using RAIDar

1. Stop host I/O if it is using virtual disks that are used by any of the drives in the

expansion enclosure(s).

2. Using a browser, log in to RAIDar on controller A as a Manage user with the

correct password.

3. Select Manage > Update Software > Enclosure Firmware > Update Firmware.

4. Select the type of enclosure to update.

5. Click Select Type And Continue.

6. Select the enclosure controller to update and click Continue.

7. Use Browse to select the file containing the

O200B28.bin expansion enclosure

firmware file that you extracted from the downloaded

neptunesw-J200R05-

01.zip

file.

8. Click Load Device Firmware File.

The current version of expansion enclosure firmware and the version in the software

package are displayed.

9. Click Start Firmware Update.

A page shows the update progress of each enclosure and indicates when the

firmware update has completed successfully.

10. Confirm that all firmware versions are now up to date on the expansion enclosures

by selecting Manage > Update Software > Enclosure Firmware > Show Enclosures.

11. Resume host I/O.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 31 32

Brak uwag

Seagate ST3250824NS Instrukcja Naprawy Strona 17