Seagate ST118273WC Podręcznik Użytkownika Pobierz pdf (Strona 43)

Configuring Console Controller Serial Ports

HP-UX version 11.00.01 Configuring Serial Ports for Terminals and Modems 3-3

3. Burn the port configuration information into the standby console controller.

To burn the config partition, enter

ftsmaint burnprom -F config hw_path

hw_path is the hardware path of the standby console controller (as

determined in step 2), which is either 1/0 or 1/1. For example, if the standby

console controller is located at 1/0, enter

ftsmaint burnprom -F config 1/0

4. The system displays a set of prompts that let you configure the console,

secondary console, and RSN ports. The default values are shown in brackets.

Enter the appropriate port configuration changes (if any) for all three ports, as

in the following display. If you are modifying a field and are not sure what

values are valid, type help (or h or ?) for help. The system displays the valid

values and prompts you to continue.

Enter your modified values

<CR> will keep the same value

Type ‘quit’ to quit and UPDATE the partition

Type ‘abort’ to abort and DO NOT UPDATE the partition

For the Console port

Bits per character [7]:

Baud rate [9600]:

Stop bits [1]:

Parity [odd]:

For the Secondary Console/UPS port

Bits per character [7]:

Baud rate [9600]:

Stop bits [1]:

Parity [odd]:

For the RSN port

Bits per character [7]:

Baud rate [9600]:

Stop bits [1]:

Parity [odd]:

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 85 86

Brak uwag

Seagate ST118273WC Podręcznik Użytkownika Strona 43